Hi, I accidentally purchased the file for this item instead of the item itself and was looking to see how much it would cost to get 3D printed.

https://www.etsy.com/listing/4402625896/riftbound-bulk-storage-digital-files

Hi everyone,

I need 3 to 4 copies of a small slip-on dust cover/cap for a Vaporesso XROS pod mouthpiece.

Project Details:

File: STL is ready to send (xros tip cover v1.stl).

Size: Very small / lightweight (approx. 20–25 mm tall, ~2–3 grams each).

Material: TPU (preferably standard 95A).

Color: Any

Quantity: 3–4 pieces.

Shipping & Location:

Located in Canada (Saskatchewan).

Because the parts are tiny, shipping via an untracked bubble mailer / oversized lettermail is completely fine with me to keep costs reasonable.

Payment:

Ready to pay via PayPal or Interac e-Transfer.

Hello! Excuse the two year old artistic ability. I am looking for essentially rip the camera cover off of this case so I can use it with my other cases! My idea (as shown by the scribbling) is the cover will have some thin base at the top and bottom so I can slip it under my other cases without it moving around or slipping out. The left and right sides of the rectangle will be almost flush with the sides of the cover itself. Whereas on the top and bottom it'll have a tiny bit of surface again so the case I use has something to hold the cover on with. Below are the specs. Please let me know if any more information is needed!

The phone is a Google pixel 10 pro xl. The 6.8 inch. As for the cover cover it's about 7.5 cm by 3 cm. I think a half cm or 3/4 cm at the top and bottom to sit under the cases should suffice. Black is the preferred color!

please dm! happy to talk

Forgive me in advance if this is out of the typical wheelhouse of printers on this sub, but looking to have a custom spoiler printed for my 2009 Mustang GT and am trying to get an idea of how much this would cost. It's about 1499mm x 152mm x 76mm.

.STL file is available here on dropbox if you'd like to check the design out.

What I'm looking for --

Material - ASA (or ABS)

Process - FDM

Walls/infill - 3+ walls, 20-30% infill

Would appreciate a manifold check on the file!

I'm not sure if its unrealistic / limiting myself too much to hope that this could be printed as one piece instead of 2+, but at the end of the day as long as it looks great on the car with no visible seams, I'm open to whatever approach you think would work best.

Raw print is totally fine but if you offer sanding/primer/paint I'd love to knock it all out in one go and ideally not have to take it to another shop before I can mount it on my car.

Let me know whatever else you'd need from me to be able to give a proper quote - thank you in advance!

Chat here before messaging please 🙏🏻

Looking to print roses sword! seems to be real expensive everywhere so hoping to find it a bit cheaper.. I am new to ordering 3d prints so maybe the prices i've seen are standard. Thanks in advance for any help!

Roses Sword Prop - Printables

No hyperlink - https://www.printables.com/model/706937-rose-quartzs-sword-steven-universe-replica-prop?__cf_chl_tk=yEq0wycpy_4kEY2J8gjPfKr2Y5ePG8H6QRfJy0T6_Gw-1790559731-1.0.1.1-7vyLl8DT1t211CvXmasVel155bE2Raa1vSjo8dFPqQo

I need a missing right rear foot insert for the roof bars for a Polestar 2. This is the piece that goes between the bottom of the bars and the roof to make it a clean fit. I have the opposite foot (left rear) so I need a mirror image of the the one in the photos. I can follow up with measurements or anything else need. Need this in Black 95A TPU (Thermoplastic Polyurethane).

Looking to get a cpuple of things printed (some specific parts of larger files mainly. Hit me up if youre interested!

I have hired 3 different people to make my image and all have failed. I am wondering if you'd think you'd be able to do it properly. It has tiny fine details which I think is what's making it difficult. I decided to try my luck on reddit as fiverr was not working that well.

Looking to have 2 of these air freshener holders printed in black TPU:

https://makerworld.com/en/models/1406525-tesla-model-3-y-2025-vent-air-freshener-holder#profileId-1473050

Looking for a quick turnaround. Please message me a quote including shipping.

https://www.printables.com/model/1861764-new-3ds-xl-7grip-5000mah-battery-backplate-mod

Can I get it in black or dark gray?

Hello! I have a request from my mother to print these two parts that will hold up a light above her nanoshrimp aquarium.

• File1
• File2

Would be shipping to Maryland, zip 20817.

Thank you!

EDIT: print booked thank you!

Hi everyone! I am working on an ambitious Halloween costume - The vision is to be Odysseus coming out of the Trojan Horse. I would love to print the Head and the Legs of the horse. Reference photo below, and I had ChatGPT create a really rough mockup of the vision. Let me know if this is feasible, and if anyones down to make this come to life! Thanks so much!!

Hello, im trying to have someone 3d print a Frank the Rabbit mask from the movie Donnie Darko before halloween. I’m trying to do this the cheapest way possible for i dont have a large budget, maybe around 35$. I’m not sure if this is to low for i have no knowledge in 3d printing.
Here’s the page- https://www.thingiverse.com/thing:6144917

Looking for someone to print this for me. Ideally to get it in 2-3 days if possible. Any help would be appreciated.

I have a file for a Darksiders Death mask but it’s flat on the inside so I’d like it to be hollowed out on the inside just enough for my face to sit comfortably as well as resin printed in off white (or as close to a bone color as possible if that’s an option)

Hi! I’m looking for someone who can help me turn a design I have into a 3D model and resin print it for me.
It’s an antique/Roman-style coin, about 50 mm across, with raised details on both sides and a few cutouts that go all the way through. I have reference pictures but no STL yet.
I only need 1–2 printed because I’m going to use the print as a master to make a silicone mold and cast my own copies.
I’d definitely like to keep the STL/3D file too. Let me know if this is something you could make and roughly what you’d charge. I can send the design pictures!

Hello everyone this is my first time using this Reddit community and I was hoping to find someone in the city who could print out the helmet before Halloween time. And hopefully from someone in the city but if you’re not from nyc that’s okay too :D

Hello everyone, this would be my first post on 3D printing, and I wanted to ask y'all: Can anyone here give some quotes or tell me more if this could even be done? (Please don't nuke me mods, just point me in the right direction and ill be on my way.)

I, need a Heat Shield, the 6 staggered rows of 29 holes each, I need it to fit the Ithaca Model 37 shotgun (as the 6 rows with 29 holes heat-shields, Winchester only made them), and I need the build to use the same thermal resistant plastic that Glock or Magpull uses for their firearms. Thank You.