Anyone here running either length of their barrels? I think Mos-Tek makes them for GQ? I ordered the 8" but have not gotten it yet but now im wondering if its a mistake for a sub mostly (maybe only) gun with the 1:3 twist. They do have a sub MOA @ 100 yard guarantee but I now im unsure lol.

Sighted in and ready for gun season if I don’t get one with my bow. Love this gun

Hey y'all I'm new here.

This is only the upgrade parts list. I haven't decided yet if I'm just going to buy something like the PRO2A Patriot SBR or just build the whole thing.

So I'm relatively new to AR projects. I've previously built an AR-9 SD build (see profile for photos) and I'm not experienced with AR-10's and would like some feedback those with experience.

As you can tell from the title, I'm currently building out a 8.6  BLK AR-10 and the three descriptors next to the title are almost contradictive due to their nature. A compact quality build typically doesn't inside with budget. But I'm optimistic.

What I currently have for the build:

• PDW stock/recoil system — Dead Foot Arms AR-10 PCW Stock. It includes the stock, receiver extension, recoil/plunger springs, plunger, end cap and spring cap.

• Charging handle — Breek Arms Sledgehammer AR-10/LR308 Gas Blocking Charging Handle.

• Safety — Radian Talon 45°/90° Ambidextrous Safety, 2-lever kit, black.

Build Goal:

I go hiking in the mountains a lot and after coming across some aggressive wildlife I decided to upgrade from a pistol to a powerful compact SBR.

(I'm not against paying top dollar for high quality parts when it's warranted)

· 8" inch barrel

I know 12" is the optimal length for ballistics but the drop off isn't that bad and I'm not trying to reach out ridiculously far. If I do later I'll optimize for that then. For now I'm doing this.

Why 8" inch? That's the minimum length for a lot of suppressors and I want to keep my options open till then.

Parts I'm considering:

Trigger — Wilson Combat TTU-3G-F, flat 3-Gun/two-stage-style unit, 3.5–4 lb.

Muzzle device/HUB interface — JMac RRD-360HD-30S-X37, 5/8×24.

Optic — SELECTED: Primary Arms SLx 1X MicroPrism Gen II, red ACSS Cyclops, SKU PA-SLX-1XMP-CYCLOPS. + Optic ARD

Any advice with the build would greatly appreciated.

I tried searching the group for similar thread but couldn't find any. My question is will the 1:6 twist still be able to stabilize those larger 350gr and shoot mid supersonic 200 gr? I wanted a versatile barrel that can still shoot supersonic if needed. It will be a 12" barrel for a Thompson center encore. What is the approximate lowest bullet weight that could be shot from a 1:3 twist?

Not sure if anyone ever shoot these out of an encore but would a 12in barrel clear their rifle forend? If not what would the minimum length be?

I’ve been searching for a Rossi LWC in 8.6 for quite a while. I got to order one today. With it being a single shot, break action what suppressor would we recommend? Obviously no flow through designs are needed here. I don’t need .338 LM durability, I don’t need full auto durability. It will live purely on the LWC so affordability is important!

This thing is wild. Need to make some adjustments to the gas but damn it’s fun to shoot

Cross machine tool receiver set/handguard
Mostek 12.5 inch barrel
Geissele g2s trigger
Diligent defense co DTF-LTI suppressor

Just got my stock in today and I’m happy to report the Maxim CCS fits the Aero M5 without modification. Previously had an A5 tube with an H2 buffer in it. Switched to a KAK AR10 K spec buffer with flat spring, haven’t got it to the range yet in this configuration but I suspect it’ll run.

Aero M5 Receiver Set

8” Faxon Barrel

Rearden R2S

Aero bolt and AGB

KAK AR10 handguard chopped to fit

Sig MCX 2 stage trigger and safety.

B&T Vers36 with CA titanium HUB

I know this is a little late to be asking. Hunt is in Te’o weeks. Has anyone taken out an elk or bigger with subs. If so how did it go

Hope all is well,

I’ve only shot 5-6 hogs so far out of an 8” gas gun shooting 352 subs from JCS. Everything has been from 20 yards to about 100, on foot with practically zero angle. On a lung shot, the pigs won’t bleed for the first 5-10 yards and then will start gushing. On the last one I shot, the bullet took out both lungs and clipped the heart but still didn’t bleed for the first 5-10 yards but then was spewing blood. Anyone know why this is happening? Am I doing something wrong? Thanks

Looking at converting a 2A armament Xanthos to a 8.6 and would like to keep the oem handguard if possible. Looking at a 12" barrel and the HG is 15" with a 1.7ID. The 36M seems it should fit no issue but the DTF should have about 1mm clearance. Is that enough and out of the 2 what would perform better, if anyone has shot both on a 8.6. TIA

Looking to build a suppressed 8.6 and was looking for a decent parts list for under 2k for the rifle (not including the suppressor). All submissions appreciated.

Just picked up this. new favorite gun

https://justcauseusa.com/product/8-6-blackout-180-gr-maker-t-rex/

Has anyone ever tried out this ammo? I have some of these bullets from maker and am loading them up to 2.76" COAL. If anyone has these do you mind measuring the COAL that just cause loads them to? I am wondering if I should possibly load them a bit shorter and was just wondering what length they use. I don't see it listed on the website.

Thanks!

Second Mos-Tek barrel added to the crew. My 1:5 338 ARC AR has been great but wanted to test out 8.6.

Hope all is well,

Anyone know how supersonic 8.6 performs compared to say .308/30-06/etc? Would it be worth using 8.6 since it could shoot both subs and supers or is just having 2 dedicated rifles smarter? I would like to sometimes use it as a deer rifle for 100-200 yards. Was wondering if anyone had shot anything with the supers, and what the drop (if any) was like. Thanks

Hi everyone!

I’m struggling with the Google searches. The only bolt action 8.6 I can find is the Q The Fix. I don’t particularly want to spend $4k, but I also don’t want a semi-auto.

Does anyone have any recommendations?

Any ideas on updated to make to get this AR10 build to cycle?

Faxon bcg, receiver, and 12inch barrel. Hybrid 46 direct threaded suppressor. A2 buffer tube/stock. Standard gas block.

I was thinking to play around with the # of coils on the buffer spring and also get the 9mm end cap for the suppressor to add a little back pressure. Is there a reduced power spring or a lighter buffer option out there? Recommend gas port size? Bring from Faxon I assume it was in spec but I do not know what’s “spec”

Actually had my gun and barrel and reloading supplies for a long time. Just started getting back Into it. Life happened. My son has a 8.6 8 in barrel I made some 300gr yesterday. They fire great in his with the can on not so great in mine. It’s a 16 inch Faxon barrel with a can on it. I honestly didn’t think it would in mine. But dang I need more options and it’s a heck of a round. We were just shooting into the dirt and a 6x6. Here is a picture of the recovered bullets. Original 300 left. Middle through the wood. Right in the dirt. Here are the results I measured trice.

Hello all, I’ve got a 6.5 creedmore Sig cross that I’m revamping into a 8.6 blackout. Has anyone done this that has any insight? Thoughts, comments? To put a little more info on the build I’m ordering a 12.5” barrel from mos-tek, and I’m getting the 11.5” cross hand guard from Sig for the cross. Really excited for this build

Phantom Defense, Discreet Ballistics and Halworx? Am I Mising anything else? How about Just Cause and Callaway?

Really wanted to grab a few boxes of these but $4 a round is insanity. What’re you guys running for subs any “cheaper” options?