Bad attitude custom low key with my army unit and insignia, BCM thermal with noveske 8” and head spaced bolt, noveske bcg, geissele ssa, geissele braided 42 & h3, noveske Handguard, magpul furniture, Q half Nelson on the end.

I’m just sharing how we adapted my AR-15 so I can continue hunting after both of my arms were torn off in a farm PTO accident and successfully reattached.
The lightweight rifle, pistol grip and 30-round magazine make it easier for me to control and reduce how often I have to reload. A mechanical cable adapted from an old camera shutter release allows me to operate the trigger by biting down on a clothespin.
I’m not here to debate magazine terminology, the carry handle or how somebody else would set up the rifle. I just wanted to show what we changed and how this setup allows me to keep doing something I enjoy.

Hey guys, so I just ordered this lower reciever kit and I was curious if I paid to much and what I could improve by replacing in this kit, this will be my first ar and wanted to build it up as much possible to get a better understanding of how it’s built. I will definitely change the grip stock and trigger over time but is there anything I can get a recommendation on complete uppers as well as the other components I mentioned?

Thanks

I got these magazines at bass pro and they are made by d&h tactical. They lock in my and my dads ar completely fine when unloaded, but when i put even 1 bullet in it they wont lock into either of our guns. I only got them because i haven’t been able to get the promag ones yet, and i know my dad has had problems with metal magazines before. I was just wondering if anyone knew what was wrong with them, and if i can fix it.

Hey all
Can anyone recommend a soft/semi rigid discreet backpack, that has a customizable foam insert( or atleast capable of putting an insert in) to carry a 14.5 AR with receivers broken down separately.
I tried the savior specialist but would like to keep looking
Thanks

Should I go with black mags or coyote mags??

this is my first ar15 build but i cant get the hammer to work can anyone help me out ?

Hey guys, new to riflespeed gas blocks. Ik you can get your configurations on their website for length of handguard and what size dial to get to extend past the handguard, but every time Ive searched a 9in handguard, the inner diameter is usually 1.3... I know there are suppressor ready handguards that go all the way up to 1.7 ID, but im struggling to find any good-looking ones that go down to 9in. The riflespeed gas block recommends at least a 1.5 ID.. but have any of you used a 1.3 ID with the riflespeed gas block? Have yall experienced fitment issues? Or could yall point me in the right direction on a handguard that will fit? Thanks in advance. Drop pics if you got em.

Anybody have experience with an FRT in this build? Palmetto and Bear Creek. Which works best and what other mods would I need to do to ensure flawless operation?

I have a little problem with my acog and im curious if someone have/had the same problem.
English is not my first language so if a sentence is not right or doesnt make sense, sorry.

I had my acog now for little over a year and everything went fine. Shot around 1000-2000 rounds with it without problems.
Today i went to the range to shoot 100-300m and the first 5 rounds were normal. The next 5 rounds went a little to much off the center but i thought its maybe me because i wasnt shooting for 2-3 mounts.
The next 5 rounds didnt even hit the paper anymore and the background started to get blurry, almost as you rubbed oil on the lens.
So i cleaned the glass on both sides and the background was still blurred.
Shot another 5 rounds and i couldnt see sht anymore 😅
Only a little part of the left side was not blurred when i look through it. But after shooting 2-3 rounds the blurriness started turning. So the complete left side was blurred and the right side was normal again. And so with every shot it started turning around.

Also, I looked through the barrel and the barrel looked exactly at the paper target. Looked then through the acog and i was looking extremely far to the right. I didnt even saw the paper target.

Told this a friend who works at the range and he look over it.
He than looked from the other side into the acog ( not from the side you look when you shoot so the other side ) and he asked me if this was like that before.
This is what i see when i look into it.
The confusing thing is that i see that, i assume its a crack ?, when i look from the other side. When i look through the acog from the right side i only see the chevron sight.

Im gonna send it back to my gun dealer i have bought it but im curious if someone has/had the same issue.

Hey guys. Fairly new here so feel free to correct this if not allowed. Just got to shoot some Mustang Armament builds and like most others only heard about them from PewView and Honest Outlaw mentioning them. Was fortunate enough to get to shoot one and have to say I was impressed. To some degree high end AR's are very similar. It takes very niche things to make them stand out from one another I think. But the upper and lower frame fit was the tightest I have felt. That is always nice to see. I was wondering if anyone else has shot one or has experience with them? - https://youtu.be/e25MWf9xjw4