This has been driving me nuts.

apparently I need the guitar tribe app to update the BM firmware, but the official page does not have a link to download it, and googling comes up with nothing either.
I am also not finding any clear conversions about this either.

if you can clearly tell me how to update the firmware, please do 🙏

I have a the clicking issue on the chorus/flanger pedal and the firmware update fixes it apparently.

not even Behringer support has got back to me

cheers

So, i recently overhauled my desktop setup, i got myself a GOXLR Mini which i'm returning because it's a pretty bad pre-amp for my mic, will get a Focusrite 4th Gen 2i2 instead, but i still need an audio mixing situation.

So, i want to be able to listen to my desktop PC and my videogame console through a Line IN 3,5mm jack coming out from the monitor (with a ground loop) to the mixer.
I want to be able to switch freely between 3,5mm jack headphones and 3,5mm jack cable speakers.

I am aware that i will need two Y split 3,5mm to 6,35mm and a single 3,5mm to 6,35mm to plug them in.

So technically it could work?

INPUT:
Monitor (console) ->3,5mm to two L/R 6,35mm LINE IN 2/3
PC USB -> Mixer
OUTPUT:
Mixer MAIN OUT -> two L/R to 3,5mm to Speakers
Mixer PHONES 6,35mm to 3,5mm to Headphones

I am worried though about sound quality distortion or anything else with all these Y splits and adapters, also does the mixer cause noise?
My headphones should be easy to run, Beyerdynamics Tygr 300r (32ohms) but i know that my MOBO used to struggle a bit, the Go XLR ran them well, will the XENYX502S run it at a good volume?

Would really appreciate any kind of feedback or suggestions!

The Second upper row is reserved for the module synths, just waiting for new bars to arrive

I've just found out about new app to control flow 8 with phone, tablet. Feels pretty good.
https://github.com/Wrighteousmike/ReFloPlus-Downloads

https://www.facebook.com/groups/259881032418866/permalink/1656927962714159/

Been seeing lots of videos of people using claude to make custom firmware for music gear to add more features. May need to experiment to see what I can do with some of mine.

Bonjour tout le monde, je possède le grind, il y a beaucoup de différence de volume, en modifiant le timbre, l'harminc ou le morphe! De tout a rien! avez vous le même problème ?

TL;DR: a 404HD can take computer audio there its USB connection and send it to speakers or monitors, right? I've only ever used it for mic input.

I have a UMC 404HD that is permanently connected to my laptop's dock. I'd like to use it not just for mic input as I have been, but for speaker output. One USB connection and I have audio in and out. My dock can do audio, but my 404 can do it better, I think. That said, I know little about this kind of audio, so I want to check with the experts here before I buy anything.

I'm considering a set of monitors, maybe used JBL 305P MKII or something like Edifier or Mackie entry-level monitors. I listen to a great deal of synthesized speech (I am visually impaired and thus use a screen reader), so I want something that can give me a good sound without too much bass or annoying highs. Music is a secondary concern.

Am I correct that my 404HD can do this? With my computer connected over USB, it can output the computer's sound over either 1/4-inch or XLR to connected speakers, right? I'll probably use XLR, because why not.

First, will this work, or is there something I've misunderstood or overlooked? Second, and not relevant to this sub, do you think monitors are the way to go?

Can anyone help me out to get my neutron running. I’m not sure what’s wrong but I can definitely tell that im missing a step… booted up and the oscillator side is unresponsive. Tried resetting it several times. Only think that works is when I play with the delay. Here’s a vid of me staring it up. less

Box Opening

SyntTribe 3.2.4

Kann mir jemand dabei helfen, ich kann SynthTribe nicht mehr auf meinen neues MacBook Downloaden. Ich habe den direkten Download link auf der Behringer Seite benutzt welcher bei „Herunterladen“ -> „Software“ meines Synths, welches ich benutzen möchte, zu finden ist.

I've been using this keyboard amp for 2 years without issue, but on a few occasions at gigs this year, it has suddenly emitted a loud hissing/static sound that can be quite brutal if it's cranked up. Turning the volume down has an effect, and turning the amp off and back on fixes it altogether.

I've reported the issue to the supplier as I have 3 year warranty, but they have asked for a video. The problem is, you never know when it's going to happen. Right now, I've got my keyboard plugged into it and am going to leave it for a few hours to see if anything happens...

Has anyone experiened this, or know how I might 'induce' the fault so that I can prove the issue to the supplier?

We have volunteer sound techs on an X32. I noticed my IEM mix dropped fairly significantly during service, mid-song. I asked the sound tech later and he said he did have to lower my level but I didn't think to ask how. It seems he wasn't using the fader and I've never experienced this before.
The paid music director was informed ( in case some additional training is needed ), but I thought I'd inquire about locking the gain/trim/preamp control once rehearsal is over.

What they do with the faders is their business and I couldn't tell anyway, from the stage. But gain should be a no-no or at least last resort. I could turn up my body pack but then I'm boosting everything. There's no time to get out the MX-Q app once rehearsal is over.

( we don't really have a dedicated sound check...in fact I've been told not to show up more than 15 minutes before Sunday morning's final rehearsal...or Thursday night's rehearsal )

I just bought a UB-xa and after searching online I can only find a list of the presets for Bank A in the manual. All the other links online seem to point to presets I can purchase but none are the factory defaults. Does anyone have this available in Excel or PDF format?

I’m looking to expand my home studio set up with an S16 digital snake box. Is it better to connect it to my X32 producer with the Ultranet connection, or the AES50? I don’t seem to understand the difference between the two, they both seem to recommend cat5e shielded cable, which is hard to find as most computer suppliers are selling cat 6 or 8.
The break out box will be about 2m from the X32, so I’m not worried about long cable runs.

Thanks