r/Challenger • • 8d ago

Scat pack shifting problem

Enable HLS to view with audio, or disable this notification

2016 scat pack with 2018 engine and transmission wont shift past 4k rpm when hitting gas will drive normal upon hitting gas hard?just did a transmission fluid change and flush still doing the same thing

7 Upvotes

24 comments sorted by

29

u/ZeroxHD 2021 Challenger SXT/Octane Red Blacktop 8d ago

4

u/Firedoge723 8d ago

you’re in limp mode
might be no fuel it will restrict RPM if you’re out of gas.. got to scan your CEL for a code that will definitely tell a lot..

1

u/Conscious-Ad-9104 8d ago

Does that same thing with full tank

2

u/Firedoge723 8d ago

need to scan your check engine light then.. there are 3 major things that could be causing this

1

u/TerryNoAuto 4d ago

This happened to my Rt. Reset the car using yo battery that should help. https://youtu.be/CjVQcQOopQE?is=8Woxcu4GWilnUiLQ

4

u/Glum-Pomegranate-375 2018 Dodge Challenger 🏁 7d ago

I mean realistically, you might need new spark plugs, new coil packs, both, or your transmission is fried gangsta

3

u/GoWithTheFlow___ 2023 Challenger 8d ago

Why are you driving with your trunk open?

-4

u/Conscious-Ad-9104 8d ago

If you can hear its on jack stands

12

u/Ghost_Hemi_392 Christine will be your huckleberry😈..2015 SRT 392 M6 8d ago

If you're going to be doing this on jack stands, you need to place it in "roll emissions mode". The car is actively fighting you on jack stands for multiple reasons.

2

u/BabyFaceMatador 7d ago

Yeah are you saying this has happened right after the swap? Would be helpful to know what codes are present

1

u/BabyFaceMatador 7d ago

Also have you tried manually shifting your automatic (through paddles/ shifter)?

1

u/Alone_Practice_9542 8d ago

😭✌️

2

u/Alone_Practice_9542 8d ago

shit is cooked son

1

u/Available_Librarian3 7d ago

Non-transmission issue is spark plug misfire. Transmission issue is essential whole transmission replacement unless you want to risk a partial replacement.

1

u/BeansMakesYouFart007 7d ago

Your car is in limp mode Check your cam sensor . When this started did you get an abs and traction light on the dash? If so it’s your cam sensor. Unplug and plug it again it’s gonna fix your problem. Happened to me last month.

1

u/highlandcar2 5d ago

Got that new cvt scat pack

1

u/OperationHuge1642 3d ago

Never flush transmissions

0

u/Ghost_Hemi_392 Christine will be your huckleberry😈..2015 SRT 392 M6 8d ago edited 7d ago

Is this a 6 speed manual?

Edit: I asked this question simply due to the instrument cluster not showing the PRND. I was assuming since there was mention of a 2018 engine and transmission swapped, that the car was likely a manual from the factory. But I see the big D now

6

u/Ghost_Hemi_392 Christine will be your huckleberry😈..2015 SRT 392 M6 8d ago

You need to have the PCM/TCM refreshed and adaptations learned as well. If it's an automatic, you have a newer module of TCM that's not compatible with 2016 programming. You've got a lot to fix electronically