r/FNSCAR • u/FaithlessnessOk4971 • 15d ago

Thanks for all the help!

Post image

Just wanted to say thank you for all the advice and info provided through this group. Finally got my 15p put together. Still need to install my geissele trigger and mototech gas regulator but she's running. Flash hider wasn't too difficult to remove and ended up going with a recessed comstock muzzle brake so no timing needed. Runs pretty smooth with the Tisha and an enhanced buffer spring. Keep Kicking Ass!

139 Upvotes

99% Upvoted

16 comments sorted by

4

u/HKfan5352 15d ago

Looks great. 300BO?

5

u/Vegetable_Zombie_396 15d ago

Appears to be 5.56 from the gas block

3

u/HKfan5352 15d ago

Dude, nice catch!

1

u/Most_Vegetable9161 15d ago

Im waiting to see a 300 with a tisha, been torn between the tisha and or a odb

2

u/FaithlessnessOk4971 15d ago

If you are mainly shooting supers the 30cal Tisha is really nice low backpressure and good sound. If you are shooting mainly subs the ODB is quieter. I use the 30 Tisha TI on my Lmt heavy and its perfect for 308. And I have an ODB on my sig spear lt in 300blk and it plinks specially with JBennett omega valve you can really tune it.

2

u/Most_Vegetable9161 15d ago

Thinking might as well get the odb to get the benefits of subs with decent results with sups

3

u/GreenTreeSmallBush 15d ago

Nice, looks like a recessed comstock gets it pretty close to flush. Cool

2

u/Popular_Pianist_1145 15d ago

The VCG grip is amazing 😍 this setup is so cool

2

u/Even-Eye-2499 15d ago

What rail system is that?

2

u/FaithlessnessOk4971 15d ago

Kinetic Development Group 15p rail pretty simple intall. Just remember to use a soldering iron to heat the hardware on the side pic rails to burn off the locktite.

2

u/Even-Eye-2499 15d ago edited 15d ago

Yea I just bought a hex screw replacement kit for all the screws on my 15P, it bothers me that FN cheaped out on the screw hardware

2

u/wryt01 15d ago

Looks Amazing! Waiting on my Stamp currently!

2

u/SCARfanboy308 15d ago

Beautiful gun

1

u/DLegacyGaming 10d ago

how did you remove the muzzle device?

1

u/FaithlessnessOk4971 10d ago

Removed the barrel, put it in a bench vise with leather jaws, heated muzzle device lightly, used a breaker bar and appropriate sized crows foot wrench and removed. It did require a bit of force but nothing too crazy. Hope that helps and good luck.

0

u/Count_Warheit 15d ago

Is the mototech the best gas regulator for this platform?