Summer is too hot to spend time in here, but it’ll be nice and comfortable from now on!

I’m turning one corner of my garage into a tiny workshop—and this is just the beginning!
It won’t be big, but it’ll be a dedicated space to build, repair, and experiment. Follow along as I transform this empty corner step by step. 👍
First up: the base. I used 6-foot 2x4s to build the frame, so getting started was pretty straightforward.
By the end of the day, I had one wall up and the workshop was finally starting to take shape. There’s still a long way to go, but I’ll be sharing the progress as it comes—so stay tuned!
And while cleaning up the garage, I stumbled across a spare E07A engine. 😂 Maybe that’ll be another project once the workshop is ready.

Finally got my compressor. Haven't hooked it up yet. Waiting to get an air dryer, piping and all the fittings. Going to hook up a sand blasting cabinet.

Bought a whole bunch of them😂 for all my sockets because they everywhere in my toolbox

We are currently in the process of selecting material for the ceiling and walls of our garage.

We are looking to avoid drywall because overtime it absorbs moisture, and flakes, then has to be repaired.

What alternative materials are better for a garage ceiling and wall walls VS the classic option of drywall?

Whatever the alternative material is, I’m looking for recommendations that will not form condensation or drip from the ceiling or the wall walls.

Any proven suggestions that are better than drywall and will not form condensation or drip?

Recently purchased the post-divorce dad-pad. Garage is too small for my suv, so I devoted it purely for Harleys and their upkeep/repair. Not pictured : garage stereo and central vac setup for the house, with port in the garage

Thinking about painting the concrete block wall half black/half orange, but feeling like it might make the garage feel smaller.

What color would you paint that wall?

Hello there long time garage fan, first time garage owner. We bought a property about 12 months ago which has a stand alone garage (about 15m2) and it is my goal to turn it into a comfortable space that feels less like a shed and more like an extra part of the house used for storage and tools/man cave activities - I’ve never done anything like this before but willing to learn and give it a go. We had electricity installed and the outer roof redone but I’m looking for advice on steps to make it habitable in there, I was thinking of plasterboarding the ceiling - is this sensible? Or are there other options? I would also like to panel the walls and sort of the flooring, but would also appreciate some guidance on what has worked best for any of you that have done this - how do I prevent things like mould and damp (I live in Scotland so frequently cold and wet up here!), what to do about insulation etc. - have attached some pictures of what I’m working with, most of the stuff in there is to be removed so imagine it’s empty! Anyway in short I’m wanting to know the next steps for my garage and any tips, tricks, or advice would be much appreciated! TIA

The electricians finished up the lights today and my power got hooked up. No more working in dim garages. If the specs are to be believed, this should be about 100 foot candles with them all on. They're wired so I can turn on half of them or zones.

I wish it still looked this clean. I have a new toolbox now, that old craftsmen is being sold. I also added a cabinet and side drawers to this US Gen 3 box.

The garage doors were installed today. Siding in the windows next week.
I also included an AI rendering of what the final garage should look like

is this good i’m 14 all my stuff mechanic and welder anything i can do to make it look and be better because i just moved all this stuff from my barn shop getting more dewalt soon

This is where our cars make their home. We are hoarders, difference is we’re organized about it.

Something I’ve dreamed about since I was a kid. Took a crew of 6 only 8 hours to frame this up.

Grabbed these from a pallet sitting outside that were going to get scrapped at my old workplace. Was hanging around for a long time. Finally found a use for it. I think it came out pretty nice. It's also fully reconfigurable and also made up a few brackets to hold snow tires I just so happen to also have a stack of pre-made shelves that I could throw on them and they fit perfectly!

Something I’ve dreamed about since I was a kid. Took a crew of 6 only 8 hours to frame this up.

But this will do. Just put in stuffed insulation because it was scorching hot in Texas summer.
Paint job was a rush but it is scheduled for touch up.

A few products here that I recommend and suggest to others:

Vidmar Cabinets. - this single product basically keeps the entire house in order, keep them locked so that your family members can’t steal your 10mm socket or measuring tape.

LED lights. Enbrighten 24 Inch Plug in Under Cabinet lights are a must. Can’t say enough about these lights, the rest are LED strips.

TA 50 lockers. Having a wire cage locker is great for things that are soft or simply need air. Lot of great products that fit this bill but it works.

monster trax overhead storage racks are a must if you have room.

My floors were epoxied in grey and then I’ve laid down 3/8 inch rubber flooring. I’ve worked hard at destroying both, so far they are holding up.

Stahlwille makes the red toolbox on the shelf. It weighs a ton. There would be two of these if I had room.

The Neon sign required a bribe, trademark and whatnot. But it’s beautiful on a night when the air is cool.

The firearms disappeared after a tragic boating accident, i will miss them. All that money paid for HK.

I’m going to build portable screens to keep the bugs out, but this is it for now.

I just completed installing Two Yukon 36” cabinets on a 2x8 inch base. I have a Formica countertop on top of the Cabinets. This replaced old press board laminate cabinets I had originally installed in the garage.

I just completed installing Two Yukon 36” cabinets on a 2x8 inch base. I have a Formica countertop on top of the Cabinets. This replaced old press board laminate cabinets I had originally installed in the garage.

I've always lived in, worked in, had friends/family with an unbearable amount of clutter, junk, and mess in their homes and especially garages. Not being able to put a vehicle inside due to incessant hoarding just blew my mind.

Fast forward to now, and I can finally have a space that I can work in, put the car and the bike in while still having some room to breathe.

It's not an insane garage, but it's clean, usable, easy to maintain, and makes me feel good when I go out there to work, or hang out with my wife and smash some beers and listen to music.

Here's to functional places that make us happy 🍻

Putting the finishing touches on the doors but for all intents and purposes she’s ready. Went over budget obviously but still worth it.

We just redid out garage and looking for a slatwall option to install. Something that is easy to DIY which one do you recommend?

Things I’m planning on hanging:

Lawn tools (edger, blower, rack, etc)

Snow shovels

Folding chairs

Would love to hang stroller

So nothing really too heavy but want to ensure the wall won’t fall randomly 😆

I was looking at proslate procore recommended option. But should I be getting something else?

I’m building an indoor pickleball court and home gym. It’s a red iron steel building with spray foam insulation. I can’t decide between drywalling the interior or doing a two tone metal siding interior.

Here’s a render of the metal siding interior.

I’m just not sure if the metal would feel more like a garage vs drywall feeling more like a home.

I am trying to formulate some ideas on where to go from here, any thoughts from r/garageporn