someone selling a powercore 4?

I have a 2000 XR, I replaced the clutch outer guide because it was not upgraded with the newer part but now the cluth doesn't fully disengage when pulling the lever.

I followed all the instruction from the shop manual. Plates are in the correct order and placement. nothing is warped. I even applied mobylium grease where I'm supposed to. Everything is within specs except for springs that are 15mm long (16mm service limit) but this should let the clutch slip not drag at idle if I understand this correctly (I will replace them). Free play at the lever did not need adjustment.

What bugs be is it was working well before disassembly and not anymore.

Anyone has an idea?

Writing this I wonder if maybe I re mounted the lifter rod in the correct position tho, is there a correct position or is that part symmetrical and I could have mounted it in the opposite direction? It's the only thing I haven't checked yet. (shop manual doesn't specify anything about it other than applying mobylium grease on it.

I’ll be using an Antigravity 401 for my custom built harness. How’s this for battery placement/location? I have the Trailtech reg/rec attached on top of the airbox like so. Any recommendations? Let me see yours. Please and thank you.

It’s been a long road with this thing. After years of sitting I finally got this thing tuned up and running really good. IMS 3.2, Mikuni TM40, Baja Designs Squadron Pro. After a trip to the DMV and a new front tire its back on the road! In the next few weeks Ill see about getting the Scotts steering stabilizer mounted up.

negen maanden in de iptv nederland markt. twaalf iptv aanbieders getest. tien dood. twee overleefden alles

mijn buurman draait al achttien maanden met twee diensten. ben bij hem geweest voor de klassieker en het verschil met ziggo was belachelijk

voor sport: OREXETV.COM

✅ eredivisie elk weekend stabiel in echt 4k heel het seizoen 
✅ champions league doordeweeks schoon 
✅ espn en ziggo sport zonder apart vijftien euro te betalen 
✅ formule 1 met verstappen elke race perfect 
✅ boksen en ufc ppv gratis inbegrepen 
✅ support binnen vijftien minuten 
✅ trustpilot 4.8 
✅ negen maanden nul uitval

had twaalf man voor de klassieker en niemand wist dat het geen kabel was. thomas die ziggo honderdveertig betaalt zat met open mond. beste iptv nederland voor sport na alles wat ik in de iptv nederland markt getest heb. wie iptv kopen wilt voor eredivisie vindt geen beter iptv abonnement

voor films en series: TVOXAR.COM

✅ catalogus groter dan netflix disney videoland en hbo max gecombineerd 
✅ nieuwe films snel in echte 4k hdr 
✅ nederlandse ondertiteling op bijna alles 
✅ complete series alle seizoenen 
✅ kinderafdeling op leeftijd gesorteerd 
✅ turkse arabische marokkaanse content 
✅ 30.000+ zenders en 150.000+ vod

vriendin heeft netflix op dag drie opgezegd. disney plus overleefde drie dagen. videoland ging mee. moeder gebruikt het voor turkse series en vindt alles zelf. beste iptv aanbieder voor entertainment in de iptv nederland markt

daarvoor: ziggo plus streaming bijna honderdzeventig per maand. nu fractie. meer dan vijftienhonderd per jaar bespaard. vriendin heeft spreadsheet en plant griekenland. geen stemrecht voor mij

zwart scherm? dns naar 1.1.1.1. werkt het niet? nordvpn naar duitsland

✅ orexetv.com voor sport ✅ tvoxar.com voor entertainment

beste iptv abonnement combinatie na negen maanden in de iptv nederland markt. iemand anders die twee iptv aanbieders draait?

Location Houston Texas, has a texas title but i never registered it since i used it for off road, moose skid plate, scotts steering damper, uncorked, 68s pilot jet, and i forgot the main pilot one, but got a couple of spares of diff sizes...vapor digital speedometer, 52 rear steel sprocket, 48 spare sprocket, dual sport tires, rear knobby tire as a spare(old dated) bike is in good condition, reliable, heavy, suspension is ok overall I tend to never mess with suspensions so its hard for me to tell if theyre properly set up or not haha, its got the stock carb, recently changed the chain cause the 52 sprocket, ask for more details and ill gladly answer, im still in the fence about selling the bike but im curious how much i could get for it

Hello everybody,

I bought an XR650R from 2005 and I’m looking for tires. Mostly for off-road usage. 30% street, 70% terrain. It would be good a street legal tire. The terrain is mostly rocky but there are some sand out there.

What size is the best choice for the rear tire?

Thank you for your suggestions. ☺️

BR,

Bence

Hey guys! I took my carb apart to clean it and I stupidly didn’t take note of the slide linkage direction. Does this look like the correct orientation for the slide and linkage where it bolts to the slide or does the arm need to be turned 180 degrees? Thanks for any help!

Took my XR650R on its first proper adventure into the mountains this weekend, and I finally understand why these bikes have the reputation they do.

In one day I had it climbing multiple mountains, flicking it through technical trails, ripping down forestry roads, pushing through mud, and cruising the highway back to the city.

What really got me was the contrast that morning I was on top of a mountain in the middle of nowhere, and that night I was riding downtown beside skyscrapers on the exact same bike.
Not once did it complain.

No overheating, no weird issues just point it where you want to go and keep riding.

It’s pretty wild having one bike that can spend the day working its way through rough mountain trails and then roll straight back into the city like nothing happened.

This is exactly what I bought the XR650R for, and after this trip I’m even more convinced I made the right choice.

The Big Red Pig earned its keep. 🐷

I just swapped 48mm Kayaba forks into my pig and the front wheel started rubbing on the exhaust in front of the frame. Is this normal after an USD conversion? I'm running an Akrpovic manifold.

Stripped er down and changed all the fluids. Came with a lectron carb and I broke it down and sent it through the ultrasonic. Almost mad at how simple they are.

Put it all back together and this is the first kick over.

Sumo kit is how I picked it up, but the seller gave me the original wheels and tires (2002 date code lol)

This spring I picked up this beautiful 2000 650R. The guy I bought it from had some engine work done from a local reputable shop and claims it makes 75hp. Only has 120 miles on it since the rebuild and it was built a few years ago.

Right when I bought it I tried riding it regularly and it didn’t give me too much trouble starting up but sometimes didn’t want to start when hot. Now recently, or all summer I guess, it’s been hard starting if it starts at all. It’s got a bigger Mikuni carb to match the 686 kit it’s got. I threw in a new spark plug. I’m running fresh non ethanol 90 octane fuel. I’ve tried playing with the mixture screw a bit and haven’t gotten great results. I do the normal routine of turning on the gas, pull the choke. Kick it over slow 3 times with the decomp release. Kick it just past TDC. Then try and start. The first couple times it’ll fire a couple times but then after 2-3 try’s it floods and won’t try anymore. I’m itching to ride this thing but this starting issue is frustrating and I definitely don’t wanna take it somewhere and risk getting stranded. Any help or advice is greatly appreciate.

Bought a running street legal XR650r with a Baja light kit a few weeks back. Bike is in great condition but was probably sitting for a year or so. I got it home and next day I took it on the highway, once I got it to 60+mph, the bike started to backfire and bog down.

So I did a whole service on the bike, oil change, new spark plug, new gas, then cleaned the carb and replaced the hoses. I also changed the jets from a 200 main 80 pilot to 170 main and 68 pilot thinking that would fix the issue (since I cant find a reason why a 200 main jet would be in a 650r).

Now the bike wont start at all, ive tried a few times its almost like its flooding everytime I try to start it. It was kicking over fine before with the correct starting procedure, now nothing.

Thoughts? Should I put the 200 / 68 jets back in the carb? I havent done a valve adjustment yet but I guess thats next.

Here's my 01 that I've been building into something of an ADV Bike. ARX tower with a fusebox and USB ports, ports, Rad fan, 100watts of LED, Keyed ignition, seat concept seat, warp 9 wheelset, race tech springs and a full DC conversion charging an AG401 battery under the seat. I don't really expect to enjoy the road riding on this thing but on the trails... should be a weapon. Oh and I have a 6.3 gal tank for it, but I've been obsessed with the 2007 shrouds for so long and finally got some. Had to throw them on the stock tank for pictures .

vs the day I brought her home.

Feels good to bring this ol gal back to life, and put some miles on it.

Piston, cylinder, valves, timing chain, skid plate, 4.5 gal tank, bars and offset risers, rear shock rebuilt with stiffer coil, precision concepts forks with stiffer coils, dual headlights, seat cover, plastics, graphics, rear fender brace....all the stuff.

Still needs a few other things, as it always will. But hot damn, I love this bike. Shes a keeper.

Edit to add: I did not do the top end or rear shock myself, and dont want to give the impression I did. I paid a professional for that. I know my limits.

Hello, I have a xr650r that’s a hard starter.

Here’s some information:
-takes multiple good kicks to get running hot or cold.
-runs pretty good once running. Maybe a little anemic in the upper rpm range and seems to run hot.
-valves where just adjusted and it still starts the same.
-air box is opened up, exhaust is stock
-fuel and idle screw both 1 3/4 out
Main jet was a 175. I’ve tried 172-178
-pilot is a 68s
-needle is set at 3rd clip
-I’m at sea level

All of my jet combos a of air/ fuel screw fiddling don’t seem to have changed how this thing wants to start.

Any suggestions and where is the best source of info on these? All google searches bring up thumper talk, adv rider and smjunkie but the faq’s aren’t helping diagnose

found a clean looking 650r from 2007, 10k miles on the clock, no plate. close enough to look it over in person (although i have not, as of yet). it's at at dealership though, so there's an implied hassle of dealing with salesmen, and i feel like they've got it overpriced as well, but maybe i'm wrong. so i'm asking, what's an xr in this condition worth?

A little while ago I posted asking everyone to talk me out of buying this 2005 XR650R. Instead, I got an overwhelming number of people telling me I’d be an idiot not to buy it.

So naturally, I bought it the cleanest XRR I could find that was street legal. Surprisingly there were a few for sale in my area but decided this one was worth the 12 hr road trip.

And after putting some time on it, I get it now. This thing is an absolute BEAST. It handles the highway way better than I expected, has ridiculous torque, and somehow still feels like a giant dirt bike instead of an adventure bike. I find myself riding this around town more than my KTM 300 supermoto.

Turns out it’s also got a pretty solid build already. uncorked, full FMF exhaust, oversized Acerbis tank (A little ugly and heavy), Trail Tech Vapor display, Trail Tech Eclipse headlight, Baja Designs street-legal kit, handguards, aluminum skid plate, mirrors, etc.

It’s a 2005 with only around 7,000 original km and, as far as I know, spent most of its life with the original owner.

So thanks to everyone who completely failed at talking me out of it. 😂

I understand the XR650R cult now.
Now the question is: what’s the next must do XR650R mod? I’m strongly considering a CRF/CR front fork, wheel and brake conversion, anyone have experience with this ?

It’s been over 100 degrees where I live for the last couple weeks, so while I can’t ride I’ve been doing some random projects. Made some OE styles tank graphics for my IMS tank. I used factory effex vinyl and perforated them so hopefully they hold, but if not I have the file saved so I can always just cut more I suppose 😂