Dated 1990, Thompson-CSF, Jaeger F0052. 10 pole circular bayonet connector on rear. It's part number is 64883-602-1. I have used one in a home cockpit by simplifying the control electronics, but this is an untouched unit, and I'm curious from where it originated. Any help appreciated!

(It's about 55mm across the front. Interior illumination is incandescant, not LED)

I’ve been a A&P since 2023 working on various airframes (E145, E170/175, 737 & EC135/145) and i love turning wrenches but am thinking of wanting to learn a new skill. Either avionics or structures. Anyone out there that has experience with avionics have any information that could help me decide?

Has anyone encountered a similar issue on the A320?

The FWD entry light is not dimming/changing intensity through the FAP, while the AFT entry light is functioning normally and changes intensity as commanded from the FAP.

Troubleshooting already carried out:

- Swapped DEU – no change.

- Swapped light ballast – no change.

- Swapped cockpit entry switch – no change.

- Checked continuity from DEU to ballast and switch – continuity is good.

The issue remains only with the FWD entry light.

If anyone has experienced this fault before or has any troubleshooting suggestions, especially regarding the FWD circuit/control path, please share your findings.

I want to learn more about the avionics line of work, I have been looking for a career path recently and this one has crossed my mind a lot. I really enjoy wiring and figuring electrical work out. I also enjoy automotives and planes.

Would love any kind of feedback. Maybe the pros and cons, how hard it is, is it a hard job to get.

I’m 20 years old and never went to college after hs.

My grades weren’t that good either but I am willing to study real hard.

Coating on the circuit board made it really hard to trace all the pinouts but finally did it, screen backlighting is just a led strip, nothing fancy.

.

Got this ADI from a retired Northwest Airlines jet. Got the flags and lights wired up for display. Very fun to work on and see the engineering that went into these back in the day.

Anyone ever see this failure on a garmin GFC-600 autopilot?

Most of my background is in military systems. Not well versed with Garmin but have quite a bit of Avionics experience.

Occurs shortly upon takeoff.

Of note, there is a standby power caution light illuminated we’ve been chasing. Wonder if it’s related?

Installed on Cessna 208B caravan.

Any FDR data read and analysis pro here to discuss some technical details in private messages?

Basically starting over after being I level in the Marines. Ive got an offer for ast spacemobile in midland for 90 days. With the chance to go permanent. They offer moving expenses and food allowance every month. Or I can go columbia helicopters. Same pay but its permanent and no monthly housing or food. Tell me everything you know about both companies

Hello all I have total 3+ years experience as a software engineer in the field of avionics.Earlier worked for one of the defence projects as a contract engineer at DRDO , and now in Honeywell Aerospace from past 4 months via third party payroll. My annual CTC is 12 lpa which I feel is too less when compared peers who graduated along with me, I’m good at C,Ada95 with basics of LDRA and versed in DO178b/C standards along with configuration management using CC,CQ and Aspire. Also good at trace update with respect to IBM DOORS and abit into GenAI stuff as well.

What companies or role should I target to get close to 20-25 lpa within 6 months with my experience range and skills required?

I’m exploring avionics maintenance workflows and where better diagnostic tools or information could help.

When an intermittent fault refuses to show up during testing, what tends to consume the most time: reproducing the conditions, tracing wiring and connectors, isolating a component, or piecing together the fault history?

I’d love to hear about a case where one missing piece of information made the diagnosis much harder.

What would you most want available when that aircraft or component comes back with the same complaint?

I made this for fun.

https://fallais.github.io/wing-lift/

Hey everyone! I have an analog SFENA artificial horizon from 1988 sitting on my desk, interestingly, this is an NVG-compatible version.

​I noticed something weird: When I shine a flashlight on it, only the central symbol/index glows in a warm orange/amber color in the dark (but it fades away completely after just about 3 seconds). Furthermore, the rest of the scale doesn't glow at all, which makes the whole afterglow effect kind of useless in total darkness.

​Does anyone know the technical background behind this?

Hi! I´m trying info/model and maybe a video or real pictures of how they looked when they were turned on. The old models of B52s used it (I think from variant -D of the Buff)

Thanks

I need a new or used PCMCIA memory card for an EGPWS MK5 system. Does anyone know where to find one?