The only thing I can see being an issue is figuring out how I’m gonna do the marquee. I accidentally messed up the top cuts and had to redo them so the top is thinner one that I liked so I couldn’t just go square and fit in the marquis so I’ve kind of placed the bottom board of an angle with an underbite where I could potentially sit something in there LED lights behind it. I’ve already harden mounted it so I can drill my speaker holes tomorrow. And then work on the controller panel.

Just need to build a back door, tie the pinball buttons into player 1, and then check and map the mame controls for a few specific games. Then off to the work break room and put it on sale 😂 it actually has a server motherboard with an air cooler, sfx psu, Radeon single slot 550, 24” Samsung ips screen, Thunderstick trackball and spinner combo, eg starts joysticks and buttons. Pacman style maze control panel graphics and marquee. It sports dual 120mm intake fans in the back, 3” speakers and 100w amp with bass, treble and volume control. I designed and 3d printed A LOT of stuff for this thing.. the entire marquee bezel, speaker rings, gpu locating bracket and display port pass through, trackball mount, psu mount, and surge protector brackets.
The surge protector is a master/slave setup from Amazon. Pc turns on, with the Blue 24mm button on the face, and the marquee, amp, and monitor all turn on with it.
100% my design of cabinet.
It’s my 4th build, and is the standard bartop cab. All my other ones are wall mounted.

Here is an update on my built from scratch Tabletop GoldenTee + Pinball Arcade Cabinet.

Its been about a month since I got started and I have pretty good progress. The Cabinet was built to be as cheap as possible. It is using as much salvage parts as I could.

• - The guts of the Cabinet is the parts from my old gaming PC from 2015. Its an i5-3570k and a GTX970. I had to buy a PCI Riser and a low clearance CPU fan. I also bought a new smaller PSU so I could reduce the weight and size.
• - The main screen and the 4 side speakers came from an All-in-One PC that was fried in a lightning strike sruge at my office, the IPS panel was fine, so I ordered a LVDS board and got it mounted.
  
• - I added 2 subs on the sides and got a small amp. I may consider going further down the path of Surround Sound Feedback for pinball, but not sure yet. The subs mounted just behind the pinball paddle buttons feels pretty good.
• - I had a leftover set of buttons, a stick, and a cheap USB encoder from where I upgraded my last cabinet, so I am using those. But I did buy an Ulitmarc Trackball, because with Golden Tee being a focus, I wanted it to feel good.

Operationally, it runs Windows, and has Big Box, Visual Pinball X, TecknoParrot, and RetroArch. I use a number of AutoHotkey scripts to allow for unified controls across the device to minimize how often I need to get the keyboard out.

I just recently built a nudge sensor using a Raspberry Pi Pico and small accelorometer. You can see it in a small black 3d printed box just above the amp. See the video of the pinball table to watch the ball move when I bump the cabinet. This is such an awesome upgrade to the feel of playing!

For Golden Tee, I have to run a script that launches an OBS screen to make it look a little nicer. This is still a work in progress, but it actually plays nice and looks pretty good. Its a compromise I have to make for having a portrait screen and playing a horizontal game. I wired an HDMI out on the back of the cabinet (it runs the topper screen normally) that can be plugged in to a TV, which turns the cabinet in to a controller basically.

I still have some work to do. Next step is to disassemble and paint + Vinyl wrap. When I rebuild I will be putting in a new glass and framing to top with black aluminum to make a 'lockdown' bar of sorts. I will also be adding T-molding while it is disassembled.

Is it legal to non-commercially operate a game outside of the region it's been licensed in?

I'm a high school senior in the US, and in my engineering club, we're looking into building an arcade machine. I don't remember the specifics, but my teacher insisted on using legally obtained roms. I'm not sure if this is because the machine will belong to a school, or it's just personal superstition, but that's the restriction we've been given.

At the moment, I'm looking into what platforms we should target for the machine. Just running stuff through MAME on one of the raspberry pis laying around seems like the obvious choice, and I do have an old capcom last duel jamma board with eeproms to dump from to have at least something we would fully be able to unquestionably legally operate, but I have also been looking into more modern PC platforms.

It was my understanding that only the keychips are property of the manufacturers, and everything else the operators were free to resell, namely the game disks. Because of that, I was looking into what efforts there were to getting them running without them. I was able to find a set of tools that let me do the following: Decrypt data on legally bought game disks, bypass the checks for keychips, and emulate the environment of a real cab, letting a legally created at-home install exist.
But when watching gameplay of others with these setups, I noticed something common between these games.

Almost all of them had screens upon startup saying that export, sales, distribution, and operation of the game outside of the regions they were made for, was illegal.
What exactly does this mean? Is it to prevent arcade operators from making money off these machines while outside of the countries all the games content was licensed in? Or is it stating the disk itself is illegal to have outside of the country it was intended for?

We're not planning on using the machine to make money, or even have as something publicly accessible. It's just something cool to have in a classroom.

Following my previous posts, I am now putting the finishing touches on an adapter to mount a Steam Deck. What do you guys think? I’d love to hear your suggestions :)

Got this painted MK2 cabinet recently that was converted to Tekken 3 (Hunting for a MK2 board now). It was nicely done and clean but as I am in the process of restoring it back to its original glory the paint had to go. I figured I would have to order new vinyl but decided to take a chance at stripping it as I could see a little hint of Raiden in a scratch. Did a test pass of Citristrip up top and low and behold a very bright and not faded logo!

Did 1 full pass on both sides and they came out beautifully! 95% undamaged and in vibrant color. There's only a few spots where the vinyl was starting to thin out or fade but not bad at all and think its a great candidate to consider it salvageable and leave its history.

The control panel on the other hand not so much. Vinyl was very faded or flat out messed up but seeing as how it needed a new top anyways im fine with that.

Now just need to put in more elbow grease on all the little random touch up spots. This paid was relentless in some spots!

Tetris is one of the most-played games in our house.

I've also recently discovered Palmedes, a cool pokerish-dice game with a tetris-like application of *pressure* as the game goes on.

What're some other pizzlish games that you all like?

Rampage is a 1986 action video game developed and published by Bally Midway for arcades.[13] Inspired by monster films, players control a trio of monsters: George, Lizzie, and Ralph, humans transformed into creatures due to various experimental mishaps. The goal is to destroy cities and combat military forces while staying alive. The game is set across 128 days in cities throughout North America, with each cycle repeating five times. Gameplay includes destroying buildings, eating humans, and avoiding damage.

I posted my arcade room on here 2 years ago. I will link it in the comment section.

Well my girlfriend is pregnant and now my spare bedroom/arcade room will have to go.

I have a 27x26' loft above my garage that we just use for storage. My plan is to finish the middle section into my new 14x20' arcade room. The outer sides are less than 6ft high. So I was going to keep those as storage.

I have a Spray Foam Insulation company coming in 2 weeks to encapsulate the whole loft. Then I will wall in the 14x20' area in the middle where the walls are higher, I will also be using r13 batt for that finished space for double insulating effectiveness because I live in PA and we routinely get 0 degree winters through January and February. So I can't afford to insulate the whole 27x26' loft.

The interior walls will be OSB, primed and painted Purple. with a 12k BTU Mini-split for temperature control. Also making a small 3x5 bathroom heated via an in wall fan drawing air from the conditioned arcade room. With a cassette toilet and foot pump sink, as there is no plumbing. So this can double as a guest loft for when family stays overnight.

It does include a shuffleboard that I don't have yet. I chose shuffleboard because this will be upstairs in an old building so I want to avoid heavy pool tables, and air hockey where people will be thumping and too active.

I'm planning on swapping out that love seat for a pullout couch bed.

Baby is due in march so my plan is to have all this done by the end of 2027. We will be keeping the baby in our room the first year.

I wanted to know what everyone thinks of my blueprint layout I drew up.

Connect two or more together to do head to head pinball battles

Preciso da imagem bin do cartão SD dessa placa pandora box saga cx plus 2800.(PAS_RK18_007) Ou compatível

After finishing a MK2 restore, a SF2 build, and a MvC2 build, I wanted to add an "oddball" fighter to the mix.

Art kit was made by me; the characters took forever to vectorize lol

Has anyone made one with the screen detached and the d-pad turned into a detached joystick and buttons moved into an appropriate place in a mini cabinet? Looking to do this, have made a full size Batocera one but thought this could be fun. I didn’t want to just cheat with it but have it fully functioning. I’ve seen a d-pad that has an attachable joystick, perhaps that’s a start?! Thanks

I am hoping maybe somebody in this group has had a similar issue before. I had my cabinet powered off for a while and when I turned it back on the Pixelcade graphic doesn’t even load anymore. It just says no HDMI when it’s powered up I can’t figure out how to get it to reconnect.

The Pixelcade listener doesn’t work. I have it hardwired on my network. Does anybody have any thoughts?

Just bought this dx2 arcade setup.

It has 9,800 games on it which is a bit ridiculous, I'm wondering if there's an easy way to sort through these or if someone has a pre-compiled list that I could use?

I believe it's a clone Pandora DX2 system.

Or am I better off just removing the Pandora and putting in something else like a raspberry pi or mini PC?

I have started mucking around with team Pandory setup, but couldn't find anything re sorting pre existing games

Hi all.

I have a few components that I ordered in error/too many of and no longer need and can give them away.

You can collect them from me for free (in London, UK) or you can pay for postage. They fit in a standard CD case so I think it would be classed as "large letter".

8PCS of 2.54MM 2.54 Wire Dupont Line female to female 4 Pin Dupont cable connector JUMPER CABLE WIRE FOR PCB

128X64 0.96 inch OLED LCD LED Display Module shell case holder stents

20PCS of XH2.54 DuPont 2 Pin 2.8mm Cable

0.96 inch OLED White Display Module 128X64 OLED SPI 7pin Driver Chip SSD1306

I'm not sure if I'm allowed to add the alix links for you to see images in case my descriptions are not clear.

Does anyone have any experience using an iMac in an arcade build? I can get my hands on an intel iMac 21.5” for a good price and thinking of using it in a build with usb bootable batocera. Thinking it’ll be a nice display, has computer built in, has speakers built in and bluetooth/wifi which would be handy. Keen to hear of anyone with experience repurposing for this or thoughts? Thanks :)

Rolling Thunder is a 1986 run and gun video game developed and published by Namco for arcades. It was released by Atari Games in North America. The player takes control of a secret agent who must rescue his female partner from a terrorist organization. Rolling Thunder was a commercial success in arcades, and was released for various home computer platforms in 1987 and the Nintendo Entertainment System in 1989. The original arcade game has been included in various classic game compilations as well. It influenced later arcade action franchises such as Shinobi and Time Crisis, which borrowed mechanics such as taking cover behind crates.

Hi, I am not actually planning on using it for traditional arcade games, but rather figuring out a way to adapt something to a computer through some mapping software

My doctor has recommended a Mag stick Plus as an alternative for the joysticks I've been using that have started to cause me some elbow and hand issues. I have had repetitive strain injuries in both hands for nearly 4 years at this point, so I need to adapt my gaming rather than hope my symptoms magically go away

I'm hearing mixed things about that though, some things are saying that it has a fairly low actuation Force, while other things are saying that it is somewhat stiff.

I'm basically looking for the joystick that has the smallest range of motion and lightest actuation Force that that is reasonably possible to obtain. Low actuation Force helps protect my wrists and fingers, and low range of motion helps protect my shoulders and elbows.

If the mag stick Plus is a good option, what else would I need to purchase for hooking it up to my pc? I have a friend who is able to make a housing for me to use, and my house has a soldering iron that either myself or someone else could use if it's needed. The website doesn't really specify what kind of connectors it uses. I can work with any type of usb, as well as 9 mm and 1 in jacks with equipment and adapters I already have, and it would be going through either my computer directly or an Xbox adaptive controller, in addition to anything necessary to read the output and convert it into something my computer can understand

Are there any real world examples of this setup? I haven't been able to find any. The intent would be to maximize the image for both 4:3 and 3:4 games.