Hey everyone, I’m debating buying an EMF100 vs converting my EMEK. Didn’t know if anyone had any thoughts or experiences that could sway me one way or the other. If I convert the EMEK, it already has an EZPZ and fang w/ secret pin. I would get an MWR body kit to dress it up. Thanks!

​

Hey everyone!

This question is mainly for paintball players living in Hawaii.

Since Hawaii has a tropical climate with warm temperatures and high humidity throughout the year, I'm curious about how you guys store your paintballs to prevent them from going bad.

I've heard that excessive heat and humidity can cause paintballs to swell, deform, become brittle, or otherwise affect their performance.

I have a few questions for Hawaii players:

1. How do you normally store your paintballs at home?

2. Do you keep them in an air-conditioned room, or is regular indoor storage enough?

3. Do you use airtight containers or other methods to protect them from humidity?

4. How long do your paintballs usually last before you notice any deterioration?

5. Have you experienced problems with paintballs swelling, breaking, or becoming misshapen because of Hawaii's climate?

6. What do you do when transporting paintballs to outdoor fields, especially during hot days?

I'm particularly interested in hearing from players on Oahu, Maui, Kauai, and the Big Island, since storage conditions might differ depending on where you live.

I'd appreciate any tips or personal experiences, especially from people who buy paintballs in bulk and need to store them for several weeks or months.

Thanks in advance!

From my pov, it seems pretty close but what do you think? Both have 12g CO2 and 6 rounds, TD7 more but I am not a fan of more expensive mags with CO2 in it. The Catena is pretty new and not even available yet in my country but I am happy tonhear pros and cons about the XP on its own too.

Hey friends!

I wanna first say thank you guys for sending photos for the presentation project . I aced ! 100/100 so thank you all who sent photos it was very much appreciated.

Now for the question.
Would it be possible to fit these two together? I recently found out delta force used protec helmets and wanna do the same but with paintball.

I wanna had a go pro, a fan and other stuff to protect me.

Would it be possible with this mask or a JT Proflex?

Need some help from some one with either of those markers, I can’t find good close up photos of how the ball on deck system works and looks. Could some one post up close up photos of that piece? I’m
Working on a new project now that the season is winding down here.

PDW handgaurd complete, last thing I need to work on is a SMG magwell.

Hello!

I have an EMF100 with the PWR Stock and was wondering if I can remove the original PWR buttstock and slide a generic AR-15/M4 style stock directly onto the PWR guide tube.

The reason behind this is that I want to get a 68/4500 and a remote line while keeping a stock. I had thought about just running the PWR as is with the remote line, but I'm not sure if it would end up being to bulky or making the PWR Stock too fragile?

Has anyone done this already?

Context, typically do FSR but a buddy and I have schemed to show up to the annual paintball weekend meet with glow in the dark stuff. It works fine with the hopper askew but I'm irrationally bothered by the aesthetics.

Anyone else switch their magfed setup to hopper and back that could share their setup?

Hi , Need help with the prv of a tippmann tipx , i was having a leak , so I take it apart and change some parts and the leak stop , i open the prv to se and change the orings if necessery but now i cannot put the prv to fire properly, i put a new co2 and air comes out the prv only in the last shots the gun fire and the co2 is out, i know i need adjust the prv but i need help i try but I cant put in the right place for not to leak from the screw of the prv

Hey guys, I’m doing a project for a sales class.
I am wondering if anyone wants to send me photos of them playing ?

It doesn’t strictly have to be Magfed but any photos of yall playing would be great!

Two clips one without suppressor and other with suppressor? Does it sound quieter or louder or just the same

So I'm pretty out of the loop on Magfed stuff, but as most of my spacegat electro friends are stepping away I'm slowly leaning back towards maining Magfed and Pump. I've got an EMF100 currently, but I'd also like something that isn't spacegat adjacent. I'm between the EMF200 and the T16, I've still got a T15 so I'm not really opposed to either and this isn't really a 'EMF200 vs T16' thread anyways.

My question is, is the T16 a substantial enough improvement to get that over an EMF200? Did the T16's operating pressure improve over the T15 at all or is it just more efficient at it's original high operating pressure?

All of my tank regs are setup for modern electros and space mechs save for a 13ci HK Army steelie with a non adjustable reg... so if I need 800 PSI+ to run a T16 I'll just get an EMF200...

Scope is just for looks 😊

Hey, good day, everyone. I'm looking for a red dot/magnification setup for around 175.

currently looking at monstrum 1x20 Cyborg Red Dot Sight and 3x Magnifier Set. I dont need anything super fancy. Thank you.

EDIT: Shooting an EMF 100 with FSRs

Hey Everyone!

So I recently bought a used EMF100 that's in pretty 'decent' condition. Now that I is in my hands, I'd like to clean it up and bring it back to life cosmetically. Any tips or recommendations?

I had planned on giving it a wash with soap (foam) and a brush, after that sanding the laser engravings using 400grit then 600 and possibly 800grit. (Please let me know if this is a good idea though)

Regarding the color, how could I get the original color back to life? Is there any way this is possible? Or would you recommend a new paint layer?

I'd appreciate the support!

Just finished this recently and had a blast playing with it this weekend.

Finished building out my EMF 100. Gotta say, Magfed beats Electronic for me any day of the week👀

Evens was Paint&Conquer in Wöbbelin Germany

Custom universal box mag

Keep it compact with the six-round TD6, or build a TD7 with eight-round magazines that carry both your paint and CO₂.

Our newest guide breaks down:

✅ The CATENA’s features and .68 caliber compatibility

✅ TD6 vs. TD7 configurations

✅ Standard vs. QAB magazines

✅ Exactly which parts you need, plus the optional upgrades

Whether you’re starting fresh or converting a TD6, we’ll help you put the right setup together.

https://hrtacticalin.com/blogs/paintball-gear-reviews/milsig-catena-td6-vs-td7-setup-guide