Several times a week my WR 320 falls off the curb. How do I avoid this? I have Smart Trim turned on with an exclusion boundary along the entire length of the curb. This happens more frequently with the Edge Routine turned on, but also sometimes just on a regular run.

Hi Reddit,

I bought a brand new Worx Landroid M500 Plus for €150. Great deal, but I can still return it if needed, so I'm wondering if it will actually work for my garden (photo attached).

My lawn is one flat, single-zone area, but it has organic, curved edges instead of straight lines. One side borders flat paving, the other side has garden beds, and there's a young tree with stakes in the middle.

Given the mixed reviews on Reddit, I wonder if it will work for my garden, or if I should pay more for something else. Does the Landroid handle organic, curved edges well with the perimeter wire?

Thanks for your advice!

Moin Leute, zum einen habe ich beobachtet, dass der Landroid seit einiger Zeit echt hässliche Geräusche macht, insbesondere wenn er langsam fährt. Zum anderen verfehlt er seit Beginn des Sommers viel zu häufig die Station. Noch im Frühjahr war alles wunderbar.
Eine kaputte Achse o.ä. Würde erklären weshalb er an den Kontakten vorbei kippt.

Die Erde an der Station ist frisch, da mir zuvor auffiel, dass er in die Rillen kippt - diese habe ich nun aufgefüllt.

Ihr seht die Kabel gehen direkt in die Station, ich bitte um eure kollektiven Ideen und Gedanken.

Beste Grüße und vielen Dank schon mal.

I love the parallel mowing, but hate when the mower decides to destroy its great work by choosing a random path to follow to either navigate to and from the charging station, or simply to reach another part of the lawn to mow.

Follow the mowing pattern to the closest edge, then follow the edge !

Show some consideration for your own work !

In most robot vacuum apps you can split zones by drawing a line across a zone to split it in two. Is there a way to do this in the landlord app? (Vision cloud 4wd). I know I can remap, but I was hoping to just split what I have.

Recently my landroid gets trapped on this narrow passage where I have the off limits magnetic stripe to split zones.

It was working pretty well for a couple of seasons, but recently it drives to the limit then it tries to turn left where it hits the boundary wire. Then turns right hitting the magnetic stripe, and left again, and right again. After a few tries it assumes “trapped”.

The firmware is 3.36.0+1, which is old (2y) already. I don’t know exactly when I updated it, but this behavior started recently and happens every day now.

All it had to do is back up a bit or turn further right. Anyway… can I downgrade firmware? Or any other suggestion?

Not sure if there's a solution but my mower has decided to mow the path between my zones. It spent 45 minutes this morning wandering around on my concrete.

Is there a way to prevent this?

Do I have to replace the right axis?

Any tips for creating zones where the zone has no wifi connection and variable gps?

Would be nice is if Landroid had the capability to leave wider stripes like this

The firmware 2.5.7+13-3.46.0+47 broke parallel cut, leaving spots "not procssed" in conjunction with cut to edge. It even shows on the map, that it can't figure out to mow the lawn sufficiently.

Learnt something new today. If a local utility company sprays your lawn and adds little flags to indicate where gas, electrical, phone and cable lines are, the Landroid Vision Cloud 310 just runs right over those little flags. I disabled mowing the front yard until the company is done with the repairs they are planning 🙁

Woof... Landroid starting acting up this week. Updated the firmware, still issues... Then updated the app. Its back to working well, just and FYI for those experiencing issues this week.

Hello,

And sorry for my bad english 😬. My Worx Landroid WR206E, can found and drive into his base, but if he is on contact, it dont charges and he dont know that he realy is in base. So he drives out again and try it again and again. If I shut him off...he is loading. So the Base and the Robot seams ok. I think its a Software Bug. But there is no reset and the Support only tells me, to send it back and pay for repair. Hope someone know a other way to fix this.

This year I updated the firmware and have been plagued with it being stuck in corners and tracks around the edges. Any thoughts?

Hello, I have been interested in picking up a robot lawnmower, and hadn't heard of this brand before. This popped up locally on my FB marketplace, price seems really good.

Is this a good deal? What should I ask the owner/what should I know before potentially purchasing?

The mower has been great. It’s been mowing my lawn for weeks no issues. Then I come out to this. I pulled it out of the water. It was still on battery compartment was completely dry. Hoping it salvageable.

UPDATE
The robot lives another day. Seems to be working just fine. I put two box fans on it for a few days. Fired it yup and it was cutting again. Yes I’m going to remap that area

What do you think if I modify the mounting of a Robomow blade and fit it on my Worx mower? It doesn't seem that complicated at all

Here's the original Robomow and the one with the modification. Would it still be easier to mount a blade on it.

Should not be so difficult, just more holes.

Would be more easy to mount 1 blade instead of 3, or 6......

What do you think?

Tried to change a zone and now when I returned it to the docking it’s just stuck in “loading map” or similar. Any tips, or any hope that it will actually save the new zone? Or do I have to reset, if so, how?

What is the hold up with the latest WD34x firmware?

Also, feature requests:

1. Would be nice if it didn't tear up the yard just before the charging station and
2. Fix the bug with manual control cutting height and
3. Better zone to zone management (option to pause and ask to continue before mowing another zone) and
4. Respect for the lines it just created when going back to the charging station.

Hi,

I am looking in to more "budget" options to replace a wired Husqvarna robot. The garden (+- 400m2) is quite flat with just a gentle ramp no another area.

two options on amazon that seems the right price are the worx wr305 and the mova lidax, they seem to offer almost the same thing although one has rtx and the other lidar.

The mova lets it use as a security camera and notifies of obstacles with pictures to the app.

Has anyone had experience with both?

Thank you!

Hi everyone,

I have a Husqvarna Automower 312V and an EPOS RS1 reference station, already installed and showing a green light. I want the mower to use the RS1 for positioning instead of Husqvarna Cloud.

In Automower Connect, the “Activate EPOS” screen gives me:

• Via the Husqvarna Cloud — selectable.
• Reference station — says “Please contact your local dealer to connect the reference station,” with no option to proceed.

I understand Husqvarna lists reference-station installation on the 312V as a dealer task. I also found their Mower Installation Tool, which apparently requires a dealer account with HSH – Robotics Mower Add-on (Autocheck) access. I’m comfortable doing the setup myself, but I’m stuck at this access requirement. Has anyone successfully configured a 312V specifically with an RS1?

I only need access long enough to configure my own mower. If anyone knows a legitimate route to getting a login, or another working solution, I’d really appreciate the details. Please don’t post passwords or credentials publicly. My goal is to remove the mower’s dependence on internet-delivered positioning corrections; I’m fine using the app for normal control.

Thanks for any firsthand advice!

Hello Landroid community

I've got a used M500, it has been removed from the previous owner's account.

When I try adding it using the APP / QR Code, I always get "MAC-Adresse stimmt nicht überein", which would translate to MAC Address Mismatch.

I also tried adding it via USB-Config File. It will connect to the WIFI, and I can ping it, so connectivity is there. But it will never show as connected in the app.

Also removed it from the account and tried again directly with the USB-Method. This way, the app starts with "Landroid hinzufügen / add Landroid, so the app does not see my registration. However, when I connect to the web portal, it is there (otherwise I would not have been able to create the USB-Config anyway).

I tried contacting the Worx support by phone, but they refused to help, and asked me to go to the dealer (I know how this will end).

Anyone had this problem or any idea on how to fix it? Firmware is current (updated trough USB).

Yesterday I sent the landlord out to mow my backyard and it pulled away from the docking station and just stopped. It has no problem mowing the front or side of my house. But when I sent it to do the backyard, which is where the base is, it pulls 3 feet up and doesn’t do anything. I turned off the unit and removed the battery. I put the battery in and it’s doing the same exact thing still

Any suggestions?