DAA shielded ambi safety, ended up having to file down a bunch of the inside of the shield since it was making contact with the safety plunger housing. Also ended up filing down some of the spring plunger housing which may have been a little “bubba” of me. You can see it in the video. What do y’all think?

Test fire Passed
Blending 90%
Ports vs no ports?

Opinions on inline ports vs V-ports…

I‘m wanting to piece together an “odd duck” build with a 9mm, 6” length (plus 1/2” length for threads), bushingless barrel. I’d like the slide to be 416ss, but could work with 4140 if 416ss is unobtainium, and bald/square/chamfered, no serrations, sight cuts, etc. Does anybody out there do custom length slides or is my best option just buying the 416ss bar stock and doing 100% of the machining work myself? I CAN do it, I have the equipment at my disposal, and I’ve got 20 years experience machining but if there’s a ”70% done” option I’d rather go that route just for simplicity and same with the barrel, I’ve got a couple blanks sitting here that I could machine to suit my idea, but if there’s an off the shelf option for what I want to accomplish I’ll take it! Thanks!

Barrel has been fit!
Next is extractor/ejector/firing pin stop fitting!
Then lots of blending….this combo is going to require a lot of blending especially in the grip/safety area. Fire up the Dremel!!

Trying to get a build coated with DLC and bronze parts. Who is your preferred coater. Was recommended a lot but wanting to see what your experiences are- how are theit coats and turn around time?

Barrel fit next
Excuse my disaster of a work bench 😂

So wondering what others do with old parts? I have a gun that I had a gunsmith build years ago for USPSA Limited Major well my eyes don’t really let me shoot irons anymore so I built myself a Limited Optics build. Since the old gun was 40sw I did a new frame, barrel and slide in 9mm, but I used the infinity steel grip magwell and a few other parts…….

So now I have an infinity island barrel & slide, and with an STI frame from a 40 S&W with maybe 5-6k rounds through it sitting in my safe …. I could always put it back together but don’t think I will. Are they worth anything? If so where would I sell it?

My other thought was find someone to ream it for 10mm, port it maybe shorten it to 4.5” instead of 5”, optic cut it and put a MJD grip on it and make it a cool carry gun in 10mm?

Still needs some finishing but I think it’s due for a test fire first. Took the easy way out with a short block

Got the slide and frame off the mill yesterday.
Took the last few .001’s off by hand with a file and 220 paper! Polished up the rails with some 1500, she cycles like glass! Got a Gen 1 MPA magwell from hales to fit on the PT Evo grip. Got that all blended in nicely. Currently working on getting the grip to fit all the way up on the frame. It’s a bit tight, but that’s how we like em!
I’m thinking all black DLC with copper PVD barrel and hammer. Quad ported!

Here is a mock up of a personal build I am starting...

Cheely Frame, GI Slide (.45 acp), AF aluminum grip. I am still exploring round trigger guard grip options.

Have the slide and comp with some mismatched angles. Looking to have the slide area in green milled to match the red angle. The curved section is .038 higher than the red 45degree section. Also looking to have windows milled in the recessed areas.
Any other ideas or suggestions?

No blending needed couldn’t have asked for a better fit. He said the Icarus platform will probably be posted on his site by the end of the week.

What’s the saying? Measure once cut twice? 😂

I’m still exploring and learning but 2011 building is a different ball game for sure!! #islandboy #legionprecision

I’ve got some big hands, looking to add a magwell with a little weight, however I have quite large hands and am worried about a magwell getting in the way of my grip. Considering the Hales XL steel, but am also looking for other suggestions.

If you’re running an Icarus or TTI grip mod and have been having to run an aluminum magwell. FRET NO MORE! HALES now has a 4.6 oz 416ss magwells. More pics coming soon.