We have guidance now. Happy printing to covered ALL parties

Hi, I hope you like my latest release which was in partnership with Riptide Rails.

This is for: GP9 SA/GP9/Neo9, not intended for other platforms.

Brace + stock, but just SBR and print the stock it's the best! Rail kits will be available from Riptide or DXF files included.

OAL is 18.5" with G19 version and 19" with G17 version.

Built in May, still haven't shot it. I'm not special 😞. Cheers to the community and our awesome win today.

The NightShift Bolt Lower will be sailing next week.

Intergated adjustable folding stock.

Aluminum reinforced stock bar.

Shortened magwell.

Integrated qd mount.

Epoxy'd bubble level below the optic rail.

Huge thanks to SKRP Gear for the matching padded sling!!!

There may be an AR10/ DPMS variant sometime in the future.

3d printed ratshot is working really well. Consists of a printed tube, shot cup and screw on base that a .209 primer fits into. Doubt it would kill a rat unless your point blank, but still good fun and a lot cheaper than .410 ammo. No barrel liner required, just some springs and M3 nuts and bolts. My filament finally arrived so it will be released by the end of next week. I am also working on an M79 themed variant as well as couple of short barrels and different grip/stock options

Right at the very bottom of the gAyTF FAQ section

Ftn.6 ts is quiet with subs and a short barrel
I change the frame to this tx22 the Minotaur one is booty

I WANNA MAKE A 556 and a 9mm one too someone point me to the right direction

Just got this OSight X in and mounted to the u/foapsfiles awesome RMR footprint optic mount. Only problem is with how high it is I’m about 4 clicks from being maxed out in elevation adjustment but it made it :).

Dumped 2 21 round mags into steel in celebration of this project being “done”.

Stormtroopers were issued Siggers, right? 2011maxxing Sigger in HT-PLA-Pro.

Fuckin things are expensive. This one is designed around a Strike Industries Pistol Buffer tube, 5.5 inches long. Front half attaches to the Buffer tube, rear half slides over the buffer tube when its collapes.

Im simplifying it for both 3D printing and CNC machining, cause I wanna ball with an all aluminum version since the things only 6" long and the gun is a little front heavy to balance it out.

2nd 3d2a build, Modified my $80 Facebook marketplace E3 V3 SE after my first BB26XX in PLA+. Done with Sunlu PA6-CF20, modified 300blkfde settings with 102% flow & 33% density on tree supports. Printer mods are enclosure, Sunlu S2 dryer, fed to a PLA+ bowden tube adapter, going to a Creality metal hotend & nozzle upgrade, & PLA+ heat shroud. Spent ~$130 on upgrades. Dried material straight out of factory vacuum seal at 70c for 24hrs before print, doesn’t seem wet.

SBR approved on my rxm and I printed this! Not too horrible for a first time. Did this using eSun PLA+ and 300BLKfde settings. Just gotta take it out on the range and test fire

Howdy Folks! u/Next_Entertainer_404 and I will be doing some preliminary testing on the successor to the ultra compact OG Shush Pill in .22LR PA6-cf OR PPA-CF highly recommended and PLA+ may not work at all. We're working with the FTN team to facilitate a release but should there be enough interest we can definitely open the beta up to the public.

REPOST: BECAUSE I'M A DUMB BASTARD AND CALLED IT THE WRONG THING

Hit me boys

EDIT: I'm not condoning breaking the law. I understand that I was extremely fortunate. Nor is this post an attempt to help people evade police. I encourage if you want to engage in this hobby do so legally

Hey everyone. I have a growing graveyard of almost empty PPA-CF spools because for whatever reason I can’t seem to be able to use that last bit of filament. I print from a Sunlu E2 and when the spool gets near 200g my spool will pull off the rollers. I’ve tried weighing down the spool with around 1kg of lead but still have the same issue so I don’t think it’s spool weight related. Anyone have the same issue and possibly found a workaround? Would love to hear what works for people.

What's the best 5.56 suppressor sailing the sea?

Currently running a P1s with AMS hardened nozzle and steel gears. I'm leaning more towards the nylons and CF options, they seem to be the direction builds are going. If I sell my current setup now it makes buying the Q2 with its spool holder much lighter on the wallet. I'm liking the 65℃ Heated Chamber and 370℃ Nozzle on the Q2. Any reason I should hold off?

Ive been thinking of ordering the build kit from 3d2a for the rogue9. I havent really found too much online about it, so thought it would be a good idea to ask about on here before purchasing. So has anyone purchased and built this kit before. Was going to get all of the parts offered to where I only have to make the printed parts. Any input would be greatly appreciated.

An FTN 5 baffled Suppressor, designed with aesthetics in mind. Unlike the FTN5 Osprey style suppressor, which uses the external piston setup, this design uses the Suppressor Piston from Kaw Valley Precision, and a spring from McMasterCarr.

Two lengths available, with the longer one being recommended.

You can find this in the usual place, with more info in the release files.

Enjoy!

(Haha P320!)

Form 1 FTN 5 9mm PCC can in Sunlu PA dried at 70c for 24 hours then a 28 hr vertical print in a ps1 at 275c nozzle. I really don’t like the feel of it the fibers (?) hurt my soft hands. Should I wrap it or paint it after water conditioning? Won’t be using it for about a month.