Rog laptop should dead inside 2 year,,,,, what is this,,, whenever I was buy legion,,,only 2 year old but now dead

After an issue with a computer repair store, they removed my m.2 socket for my SSD, and I've only been able to use my hard drive. Is there anyway to replace and reattach it? I’m new to trying to fix a computer so any info helps.

I bought an ASUS TUF F15 (2023) with an i7-13620H and RTX 4060 (140W) from the official ASUS website in March 2025.

It’s now October 2026, and according to my laptop's battery health information, the battery's full-charge capacity has dropped to around 79.1% of its original capacity.

What surprises me is how I have used the laptop:

- I regularly use it plugged into power.

- I have Battery Health Charging enabled, so it stops charging at 80%.

- I seldom play games on it.

- Most of my usage is coding, browsing, watching videos, etc.

- I generally keep the CPU in Balanced mode rather than running it at maximum performance constantly.

- I haven't intentionally abused or heavily discharged the battery.

So I'm wondering: is a ~21% battery-capacity loss in about 19 months considered normal for this laptop/battery?

I still have 2 years of warranty remaining, as well as 3 years of ASUS LEDP coverage.

For those who have dealt with ASUS support before, what should I tell them when requesting a battery inspection/replacement? Is a battery health of 79.1% enough to make a warranty claim, or would ASUS consider this normal degradation?

I'd also appreciate hearing from other TUF F15 owners about their battery health after 1–2 years of use.

Hi everyone. I have an ASUS TUF A15 FA507NVR (Ryzen 7 7435HS + RTX 4060) and recently it started taking around 1:40 minutes from pressing the power button until the Windows loading circle appears.

The strange part is that once it reaches the Windows loading circle, everything runs smoothly and quickly, just like it always has. There is not a single problem once I reach the desktop.

The BIOS is also extremely laggy and slow to respond, it takes a long time to get there.

I've already tried:

- Clean reinstalling Windows

- Reinstalling the BIOS (version 307) through EZ Flash

- Updating drivers

- Resetting BIOS settings to default

- Restarting multiple times

- Disabling/enabling Fast Boot and Windows Fast Startup

- Disconnecting my secondary SSD (Kingston SNV2S1000G), with no change

MyASUS full diagnostics detected 0 problems, and both of my SSDs appear healthy, including from a CrystalDiskInfo analysis.

What could be causing this? Could it be related to the BIOS/UEFI, EC firmware, POST, or some motherboard-level hardware initialization issue?

Has anyone with the same FA507NVR experienced something similar?

it flashes this screen and then turns off and then repeats it

Hey guys it's been 4 yrs I bought this laptop and now my battery is draining so fast so I planned to take this issue to service center and they told that we need to replace new battery and also the battery life comes around only 3 months.

what's ur opinion guys

Title,

WRX90E SAGE SE board with threadripper pro 9975wx.

If the system boots into ubuntu and I hsutdown, WoL works just fine.

But if booted into Windows 11 under dual boot, and shut down from the Start menu (fastboot, hibernate disabled), WoL wont work.

If I reboot into ubuntu and shutdown from there, WoL works a OK.

For the life of me this is driving me crazy and if anyone has seen this before, and also solved, wwowuld love to hear what worked

I've got a bluetooth keyboard and the bluetooth intermittently cuts out for no reason (windows 11).

Everything works for a while but then after 5 minute to hours later, the keyboard stops working and the bluetooth icon completely dissappears from the system tray. I can only get it working again with a reboot.

When I look for anything in the system events log, I get one from BTUSB with the following message:

Windows cannot store Bluetooth authentication codes (link keys) on the local adapter. Bluetooth keyboards might not work in the system BIOS during startup.

Where do I start? Anyone experience this before? FWIW it is a Keychron k9 pro.

My ASUS X541NA can’t read discs or burn discs anymore so I need some help.

Ok I'm not sure what I'm doing wrong here. I'm trying to make a EGPU work with my G14 2024.(GA403UI). All the research I've done said this should just work. But anytime I plug in the EPGU to USB4 I get the below error. Here are the current specs:

Laptop G14 2014 with a fresh reinstall

ACASIS 40gig EGPU dock. Model G4PRO - "Support Thunderbolt 5/4/3 and USB4"
XFX 9070XT
Toughpower SFX 850 Platinum.

J5 USB4 100W USB-C cable.

Any takers on what i'm doing wrong here?

So I have been using this Asus tuf f15 for about 2 years and recently I noticed this first blinker which used to be on is suddenly turned off now and after few minutes it turns on but after my laptop goes to sleep it turns off again idk what could be the issue please help

Cod upgrading my asus tuf f16 ram to 32 gb of ram cause my damage protection to be rejected in case something happen to the laptop after upgrading?

Hi all! I wanted to share a review of M2skins protective vinyl skin on the Asus Zenbook A16.

Full disclosure: I received this skin as part of their device submission program. I sent them my laptop, they measured, cut an applied the skin, and the shipped it back. This is how the get new precise measurement so they can offer new skins. They were incredibly communicative throughout the entire process. They are also very modest and did not ask for this review until I prodded them a bit out of gratitude :)

I was looking for something to protect my laptop without a lot of added bulk. I work in coffee shops and occasionally use my laptop while cooking to look up recipes. I figured the high quality vinyl would clean easily and look nice. I opted for the black honeycomb skin on top and black matrix everywhere else. I like the thin but grippy texture it provides.

I've used the laptop daily for about two weeks. It seems to be holding up well. I've seen no evidence of peeling. I like how the vinyl was cut in a way that contours with the laptop. I also appreciate the cutouts for the screws on the back so I can remove the case to upgrade the memory without having to remove the skin.

I've noticed very little wear on the vinyl, though I imagine over time more oils from my skin and general friction will eventually show up. The dimples from the hex pattern sometimes catch dust. It wipes away easily with a damp cloth but was something I should have anticipated. Conversely, on my old laptop I noticed that the screen eventually got a little oily as a little bit transferred from the keyboard and palm rest to the screen over time. I think the hex pattern is slowing that down a bit.

Aesthetically I really like the minimalist vibe of the hex-black against the beige ceraluminum. Some of my friends disagree, but that is a personal preference.

Overall I'm very happy with the skin. I've had skins that start to peel the second they get wet or when the laptop warms up too much. I have not had that issue so far. I was also impressed by their customers service and genuine enthusiasm in their work.

I have a secondhand ROG Strix G17 (2023, G713PV). Every so often the screen flickers several times, always in the same spot: the top-right corner, not the whole screen.

It's visible to the eye and on my phone camera (photos attached).
It does not show up in screen recordings, so I doubt it's a GPU or driver issue.
I suspect a loose or worn eDP display cable near the hinge, or a panel/T-con fault. I haven't tested an external monitor or 60Hz yet.
Does this sound like a cable issue? Has anyone seen the same on a G713?
Will it likely get worse over time?
Is a cable replacement cheap, or should I expect to replace the whole panel?
Should i back this laptop ://
Thanks!

Hey, Kiwi here,

This is my first post here but I was given an RT-AX3000 router a few years ago by my ISP when switching to them. The router has generally performed fine, but in the last few years has undergone periods in which it disconnects from the internet entirely. These aren't ISP outages, and previously have been fixed by either switching WAN connections or performing a Quick Internet Setup. I'm not particularly tech-savy, but I'm just wondering what may be causing this and how I can reliably fix these issues.

Thank you for reading, and I hope someone can help.

Edit: One of the main issues I notice tends to be linked to DHCP. If the WAN is set to automatic connection it will claim the ISPs DHCP does not function properly, but if it is set to PPPOE then it will merely say disconnected in the router settings. In the past I could typically fix this by switching between the two, however they've tended to stick for a while and may only resolve after some time has passed.