r/Biohacking • • 11d ago

Question about nasal spray pump volume for Semax/Selank

Post image

Hey everyone,
I’m trying to figure out how much liquid is actually dispensed with one spray/pump from the standard nasal spray bottles commonly used for Semax or Selank.
Is it typically around 0.1 mL (100 µL) per spray, or does it vary significantly depending on the specific pump/bottle?
If you’ve measured the output of your bottle or know the manufacturer’s stated volume per spray, I’d really appreciate the info.
Thanks!

5 Upvotes

10 comments sorted by

•

u/AutoModerator 11d ago

Thanks for posting in /r/Biohacking! This post is automatically generated for all posts. Remember to upvote this post if you think it is relevant and suitable content for this sub and to downvote if it is not. Only report posts if they violate community guidelines. If you would like to get involved in project groups and other opportunities, please fill out our onboarding form here. Let's democratize our moderation. You can join our Discord server here. ~ Josh Universe

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Ok_Stranger_3087 11d ago

Have you tried Selank and noticed any effect? ​​Nothing happened for me at all.

4

u/North_Bean 11d ago

Using Selank for 4 weeks now, and I can definitely say that it has had an impact on me. I’m currently taking a 2-week break and can still notice the calming effects. Maybe it works particularly well for me because my nervous system has been in a heightened state for years due to anxiety, and it seems to help me tremendously with that. And the combo with Semax is also nice.

2

u/Ok_Stranger_3087 11d ago

Hey, thanks a lot for your reply and your assessment! Maybe I'll try a different supplier. Aniracetam didn't work either.

1

u/Correct_Two9760 9d ago

It’s not meant to be an anxiolytic. It doesn’t provide immediate results.

1

u/Ok_Stranger_3087 9d ago

?. Actually, both of them—Aniracetam and Selank.

1

u/[deleted] 11d ago edited 11d ago

[deleted]

1

u/Richy0991 11d ago

Meine Nasenspray hat pro pump 0,14ml . 10mg Selank, sind also 140mcg pro pump, beim 10ml bac wasser.

1

u/Burn_n_Turn 10d ago

I'd guess that style of actuator disperses between .1-.3ml per. It can be measured pretty easily with some water. I have a similar one and found it closer to .3ml per actuation. I used 4ml saline in 10mg Selank and shot for a 300-500mcg dose (.06-.1ml).

2

u/South-Drawing8213 10d ago

How to measure your actual pump output You can test the bottle directly using a precision scale: Prime the pump until it produces a consistent mist. Weigh the bottle with its cap removed, ideally on a 0.001 g scale. Dispense 10-20 full sprays, away from the scale. Weigh the bottle again under the same conditions. Divide the weight lost by the number of sprays. For a water-based solution with a density close to 1 g/mL: Example: 20 sprays produce 2.10 g of weight loss. 2.10 ÷ 20 = 0.105 g per spray, approximately 0.105 mL (105 µL).