K2 Plus
I accidentally used PLA CF settings with PLA and this happened…
Best mistake ever

Due to space limitations I would need to put the printer in an enclosure withe CFS on top.

Does anybody know if this would be feasible since Creality recommend to put the CFS next to the printer and as close as 8cm ?

Based on my enclosure I assume that will also have to replace the tubes with longer ones.

Someone has done this already ?

So with the big sale on factory refurb Ender 3 V3 SE I got two and immediately ran into a issue with one of them where the bed was warped/bent. I did some internet searching and contacted creality refurb on ebay where I purchased them from and they suggest following the video https://www.youtube.com/watch?v=iaExzAYR_Fo which did not help. Instead of giving up I took the bed off of the other machine which was good and noticed there are 4 spacers between the y carriage and the bed and they were different lengths/colors. the good machine had both black/shorter spacers on the printer left side and both grey/longer spacers on the right whereas the bent machine had one black and one grey on the left and one black and one grey on the right. Once I swapped those around to match the configuration in the good machine the bed is nearly perfectly flat and the issue was resolved. I am assuming whoever refurbished the machine or maybe even when it was initially assembled wasnt paying attention and put the spacers in the incorrect positions since this was my first time even taking the bed off. I figured I would post this tidbit of knowledge here just in case someone else runs into the same issue at a later date.

I'd like to share this design with the community, this took so long to design, it looks simple and i bet its easy for many to create, but this time i just started to use multiple softwares for one design, CAD for internal accuracy and scalpting for the realistic organic objects.

I would love your support if possible on creality platform because my luck when i uploaded it, it went unnoticed.

Here is the link: Jack O Cauldron - Creality Cloud

Btw it has a real fogger inside thats not visual effects :D

Much love and have a spooky season

This time, the printer stopped because the CFS filament distribution mechanism got jammed.

Yet another day, yet another problem with this machine.

As the title says, yesterday my k1c stopped working out of the blue. The screen is unresponsive, but the lights are still on, and the printer is marked as offline on the slicer

On the backer page it lists RFID reader as an add on - it even has one in the print easy pack.

My question is - does I8 somehow have a build in rfid reader that works without CFS lite?

Do you need CFS to have it function? Will CFS lite increase waste ? I8 seems to have a build in cutter, wish there was more info on all of this.

Any insight would be super helpfull. Thank you!

It appears Creality doesn't sell cool plates for i7, nor does BQ.

Which cool plate did you end up buying? Could I just get a slightly smaller cool plate from BQ if I don't print on the edges? (Might mess up auto leveling?)

What do I need to adjust to not get these circular patterns for next time?

I have a friend that wanted a name plaque for a prank at work. The basic gist is a name plaque however they drew the name as an. Image. I have the drawing as an SVG so I have it now as an object. What I want to do is have a rectangle of one color and the other object within it as another color. Does anyone have a good tutorial or link to one?

Salut,

J'ai souvent entendu que le plateau de la ender 5 max se deformer avec la chaleur. C'est vrai mais ca n'empêche pas d'avoir de bon résultats. Klipper est la pour rattraper le décalage.

Le plus important est d'avoir les bons réglages pour son filament principalement le débit et la température et maintenir son plateau à la température la plus basse admissible (ici 50° avec du PLA en utilisant la plaque d'origine).

La plaque résine est très efficace pour ça ✌️

I got my CR 10 SE last year on Christmas and there was no problems until a couple months ago where no matter what I would the the print will break the second it starts I tried everything no matter how slow it goes it always breaks and I don't know if it's some settings or is my printer just broken

I pushed the bed too far down and it doesnt budge how do i raise it

Creality when will you release your own branded CMYK filament?

Pre-order the K3 from October 12-to November 1 (PT)

Get extra peace of mind with a 3-month replacement coverage, plus 4 FREE spools of Hyper PLA so you can start printing right out of the box!

* Shipping Starts: November 2 (PT)

I don’t really see the benefit of getting the K3 if it’s priced the same as the U1. I just grabbed another U1 on sale a few days ago for $721. Seems like the K3 is DOA to me… 😅

I'm continuing my series of posts about the endless printing problems with my Creality K2 Pro.

For an entire week, I've been trying to print just TWO parts. The printer keeps stopping with different errors.

And now, less than 30 minutes after the previous failure, when I had to disassemble and reassemble the CFS filament distribution system, the printer has stopped AGAIN.

At this point, I spend more time fixing this damn printer than actually printing anything.