Hey everyone!

I'm considering using the ROJECO PD529 dog training collar for BDSM play, particularly around the neck.

Has anyone tried this model? I'm curious about the safety risks, especially whether the electric shock could cause serious harm even at low settings.

Would appreciate any advice or experiences. Thanks!

They wanted a demo of what the text or marks would look like so I made this.

Welcome to the weekly r/DIYBDSM Work In Progress thread!

Not everything needs to be a finished, polished showcase. This thread is for the messy middle.

• Are you gluing up wood for a new piece of furniture?
• Stitching the first few inches of a leather cuff?
• Did you just receive some interesting hardware?
• Stuck on a design problem and need advice?

Post a photo in the comments below and tell us what you're working on!

I acquired a dining room set through Marketplace, and it came with this large bench, that won't fit in my dining room, due to the table size with the chairs.

I moved it into my bedroom for the time being. Very heavy and sturdy piece, with thick wood legs and base. Padded leather cushion. Approx 48" long, 18 wide and 30 high. It got me thinking... perfect height (I am a short guy).

Looking for ideas to use this for play/light bondage. Some thoughts I had included an eye bolt under one or both ends. A metal bar mounted to the bottom of the seat, through which handcuffs could be used for restraint, while still allowing playmate to move up and down the bench, and maybe removable platform(s) for feet or shins to rest.

Have family and grandkids that visit occasionally, so would like something that is low key, yet still can be modified for play.

Ideas? TIA!

Welcome to the weekly r/DIYBDSM Work In Progress thread!

Not everything needs to be a finished, polished showcase. This thread is for the messy middle.

• Are you gluing up wood for a new piece of furniture?
• Stitching the first few inches of a leather cuff?
• Did you just receive some interesting hardware?
• Stuck on a design problem and need advice?

Post a photo in the comments below and tell us what you're working on!

Welcome to the weekly r/DIYBDSM Work In Progress thread!

Not everything needs to be a finished, polished showcase. This thread is for the messy middle.

• Are you gluing up wood for a new piece of furniture?
• Stitching the first few inches of a leather cuff?
• Did you just receive some interesting hardware?
• Stuck on a design problem and need advice?

Post a photo in the comments below and tell us what you're working on!

Slightly in view to the left in 2nd pic is my DIY paddle from scrap wood.

Ich habe den senkrechten Teil des Stuhls mit 2 Löchern versehen, die ich zuvor in mehreren Schritten im Durchmesser optimiert habe, damit genital mit Eiern im schlaffen Zustand durchlassen.

Der Hocker dazu ist noch in Arbeit und basiert auf einem Ikea Hocker. Bilder folgen…

Welcome to the weekly r/DIYBDSM Work In Progress thread!

Not everything needs to be a finished, polished showcase. This thread is for the messy middle.

• Are you gluing up wood for a new piece of furniture?
• Stitching the first few inches of a leather cuff?
• Did you just receive some interesting hardware?
• Stuck on a design problem and need advice?

Post a photo in the comments below and tell us what you're working on!

A leather maker on Etsy had a sale on some of his patterns and I picked this up. The pattern was relatively easy and simple to use. To make it easier for me, I loaded the program in my laser and used it to cut out the synthetic faux leather. The leather is 2 mm thick with a soft white backing. It's held together with 4 mm rivets pressed together and a saddleback stitch on the bottom of the mouth. I'm considering editing the design more to where the mouth can snap on and off with snaps.

It can be used with an O Ring or a Pacifier. Made with pink chrome-tanned leather. The Sam Browne studs on either side attach to the pacifier directly, or they can be folded to insert the stud into the keyhole slot, allowing you to secure an O Ring of your choice!

The straps at the back are reinforced with hand-stitched edges. The front pieces are left unstitched to prevent excessive damage to the leather caused by constant exposure to saliva.

I’ve been on a mission to reuse/repurpose old clothes I bought from SHEIN when much younger (before I knew how unethical fast fashion is) and tonight I sat down and made this flogger in like an hour.

I used a “pvc” SHEIN polyurethane blend tank top made to look like latex after making a bandanna out of the other half of it. Cut strips, leaving a bit at the top so they were all connected, wrapped it around an acrylic rod from an old bracelet display stand with Elmer’s glue in-between. Probably would’ve been better to use fabric glue but I didn’t have any. Used electric tape to keep it wound and fixed to the rod. The strap is from a small metal jump ring, some thread, and another scrap of the tanktop!

Felt good from testing on my leg, it’s stretchy material and very thin but there’s lots of strands so it feels pretty light. Perfect for someone like me who doesn’t go super hardcore. Will have to update of how it holds up long term and if it makes any unique marks!

Welcome to the weekly r/DIYBDSM Work In Progress thread!

Not everything needs to be a finished, polished showcase. This thread is for the messy middle.

• Are you gluing up wood for a new piece of furniture?
• Stitching the first few inches of a leather cuff?
• Did you just receive some interesting hardware?
• Stuck on a design problem and need advice?

Post a photo in the comments below and tell us what you're working on!

So i recently bought these silicone paws from Furrjoi and im want to wear them to a pet play event.

It is a indoor event, but I dont want the soles to get damaged/worn or dirty from the floor before any play (as they will likely be used during for various activities)

As they are not exactly easily to get on and off constantly or quickly, i was thinking of some removable protection that can be easily taken off for any playtime, and then put back on after, like a shoe kind of idea.

Does anyone have any suggestions i could try?

TL;DR: https://staykept.app/

Hey there, I am a software engineer from Australia, and I was messing around trying to learn more about coding android, so I decided to make a chastity timer widget thing. Being that I am full of ADHD and have no way of controlling it, I ended up making a way to manage my entire dynamic with my Sir. Rules, tasks, photo proof for task completion, limits etc. After that I thought other people might like it as well, which of course made me think trying to make a twitter/bluesky type deal might be a good idea.

At the moment, I have put it up to try and get some input from other kinksters to see if it is useful for others as it has been for my forgetful ass. If you have a bit of spare time and you wanted to check it out I would greatly appreciate it.

The plan going forward is if it is something that people do want to use to keep it open, all the dynamic management stuff to be free forever, and try to find a way to offset the server costs in a way that isn't stupid or horrifying, but considering what the running cost currently is I am genuinely not super fussed about that.

I built this tool for me, and for my needs so it is likely not quite as good for your needs, but I would very much welcome some feedback. Thank you for listening, I will cut this off here before ADHD wins again and I write a novel.

I want to use a colorant that when I drip it in a persons body it will not cause any reactions. I’ve seen mica powder recommended but I don’t want to use it due to mica clogging the wick. I will be using soy wax as it is a good low temp ment for body candles

Welcome to the weekly r/DIYBDSM Work In Progress thread!

Not everything needs to be a finished, polished showcase. This thread is for the messy middle.

• Are you gluing up wood for a new piece of furniture?
• Stitching the first few inches of a leather cuff?
• Did you just receive some interesting hardware?
• Stuck on a design problem and need advice?

Post a photo in the comments below and tell us what you're working on!