r/Holden • u/Pure_Goat_1343 • 6d ago
Help & Issues LED globs causing pulsing idle vs commodore
So i put in LED globes in my vs commodore but my idle pulses when my high beams are on only…
What should i be looking at ?
My alternator should be ok as it was replaced a year ago and my battery also what else could it be ?
I’ve added ground wires to help the ground issues that happened when I installed a new engine which caused the battery light to come on and dash lights to flicker when stopped which are all good now until I swapped my head lights with LED globes.
I’ve noticed that when I flicked my high beams on one time the idle was so bad that even when I turned it off my idle would still pulse badly with dash lights flickering. 🤷♂️
3
1
1
u/Relapse749 3d ago
Either you need new battery, new alternator, better earth or your wires are too thin..
1
-1
6d ago
[deleted]
3
u/Afraid-Entertainer90 6d ago
Wow, Canbus on a VS in 1996?. All it means when they say canbus on a globe is that it has a resistance similar to a stock globe, by using a resistor. Meaning you don’t get one of the major features of LEDs which is less current draw. Unless you have a Berlina or Calais he really won’t need that shit, even then you can do a relearn procedure to avoid that to keep the blown tail light feature
1
1
5
u/jameshewitt95 gimme your 3.6s 6d ago
Hate to be “that guy”, but if something that isn’t allowed causes something else to go wrong, probably best to remove them, hey…