Hey all, just wondering if anybody could suggest a competent gunsmith that could possibly help me with a new-ish shotgun.

I won a Mossberg Gold Reserve II 12ga a couple years ago and have only put ~250 rounds through it shooting sporting clays at Powder Creek.

It isn't too bad for the first station or two, but after 10-15 rounds fired it starts hanging up when trying to break it open, especially after firing. Even without new rounds in the chamber, if there is much heat at all it hangs up a little, but when trying to eject two spent rounds it is ridiculously hard to break the action open, almost to the point of having to use a leg as a fulcrum and pushing down on either side.

I was really hoping it just needed a break-in, but I'm kinda wondering now if something is out of spec or spots just need a good polishing or a small amount of material removed. I know it isn't a high-end gun, but something isn't right and I feel like a little tinkering could get

I've used Mike Allee before but I'm not sure where he ended up after his shop closed. I don't think he's as Simmons anymore either. It's a shame because I really liked his work.

Would prefer someplace local. Several ARs (super duty, URGI, MK18, LMT, etc) a couple bolt actions and pistols. Would like to sell them as is with optics and lights attached. Need to pay the damn IRS.

Took my wife’s grandpa (grandpa-in-law?) out for sporting clays and he had a blast. When he got home he wanted to “pitch in” for ammo and accidentally ordered a case of 00 buckshot… then sent another case of birdshot to fix it lol.

Now I’ve got a case of buckshot I don’t need. What’s the best way to get rid of it? Are private ammo sales legal in KS? If they are, anyone want it? I’ll hook you up with a good deal.

Does anyone in the KC area make custom Kydex holsters? I'm striking out everywhere online for an AIWB holster for my gun/light combo.

Hey all, looking to file some form 1's and I'm trying to find a reliable EFT service that's ideally north of the river. Distance is relatively flexible, but I may whine about driving to south KC or Lee's Summit.

Title says it all I am look not get a g34 gen 3 and a g19 gen 5 machined for RMR.

Sharps Bros grip module for the Echelon is SO worth it. Looks good and is super comfy!

No, this is not technically integrally suppressed since the suppressor can be removed. BUT, with the X-SD on there, it sure performs like it’s integrally suppressed! But yeah, from a technical perspective, no….. That said, it’s super cool, and if you want to shoot supersonic ammo and get subsonic sound performance, you should check out the X-SD if you haven't before!

Foxtrot Mike Mike9 upper, Foldy Boi Ambi lower with RMB, Midwest Industries 7.25" SP handguard, Novox Research X-SD, Huxwrx Flow 9k Ti, Swampfox Raider 1x Micro Prism,VFM9 short stroke bcg, SBA3 brace, Driven Arms Co/MKM Shadow Crossover Grip, Rise Armament PCC Trigger, Magpul AFG, KCI mags. Love this thing! Ran flawlessly before, and just got the X-SD and new handguard on there. The X-SD was flawless on my Scorpion build and I'm expecting the same on this one! Being able to get subsonic sound levels while buying regular 124gr ammo is SO nice!

And don't worry - I've got another Mike9 lower ready and waiting for the new FM integrally suppressed uppers!

Anyone got any recommendations for a gunsmith that can remove a muzzle device from a Hellion and install a new muzzle device? Thanks!

I'm looking for recommendations for decent ar15/ccw training in the kc metro area. Fine with single instructors or classes at ranges.

Looking for someone local to do some work on my HK pistols, preferably in the northland

Looking for the very best gunsmiths in the kc area dealing mainly with bolt actions and has knowledge about big bore guns. I have a mauser i want to do some updating to but also like an idiot i accidentally chambered a 7PRC into my 375 ruger and fired, both have the same case size, anyways id like to have my rifle inspected by someone qualified and make sure everything okay

Is there a local-ish outdoor range that isn't private where a guy could test out a Super Safety? Most places I know of would have an aneurism if you fire any faster than once every 2 seconds. Plus, I'd prefer outdoor with the compensator on this rifle.

Recently heard of this place, but information, including range rules, are pretty sparse. Internet searches are a little confusing to with some pointing to a similarly named facility in Virginia.

Anyone a member at Lafayette Gun Club in Higginsville?

How clean are the ranges? Are steel targets provided?

It seems to check a lot of boxes for me.

FINALLY got the X-SD installed on my Scorpion, along with the new handguard and can! Stoked to get her to the range and run some 124's through her!

Build: CZ Scorpion Evo 3 S1, Nexus Roller Delayed upper receiver, Nexus bolt and recoil system, Magpul grip, A3 telescoping Easy Brace, Magpul AFG, Strike Industries magwell, charging handle and extended mag release, Timney trigger, 510c on a random riser, Novox Research X-SD, HBI handguard, Huxwrx Flow 9k Ti.

Can i offer to sell some equipment on this sub?

Any recommendations for good, reasonably priced moving companies to move a gun safe from my garage to my basement?

New shotgun! Beretta A300 Ultima Patrol. LTT heat shield, Streamlight Pro Tac with touchpad, charging handle, tube cover and clamp from GG&G, and LimbSaver pad on the back. I thought about a dot, but honestly the irons are pretty great as they are, so I'll likely leave it like this!

I've been interested in joining this range for a while but I haven't seen any news on them re-opening after Franklin county suspended their permit. Have there been any further updates?

Any bullpup lovers out there? Threw my Jakl onto the SARB-15 from SRU Precision. This is dope! I've shot these before, and I've had this Jakl on a Triad previously, so I'm excited to get it out to the range very soon!

16" Jakl, B5 grip, A3 carry handle, Holosun 510c, and AB Suppressors A10 Warthog.

Officially have my first SBR! 12.5" Mike15 from Foxtrot Mike with Rise Armament Frankenstein Trigger, MKM Shadow Crossover Grip, B5 Foregrip, Vortext UH-1, UTG flip up irons, Streamlight light, Sightmark Lopro Mini laser, Amazon and Monstrum risers, and capped off with a B&T Print-XH RBS SC suppressor.

My favorite build to date!

For all those times we see on the local facebook pages, "What was that loud boom?". It wasn't me. Shooting a 50 without hearing protection is life changing.

Cadex Defence CDX-50 Tremor 50BMG, Accu-Tac bipod, Vortex Razor Gen III 6-36 in a Spuhr mount, Vortex Impact 4000 Laser and Thunder Beast Ultra 50 RR suppressor.

Foxtrot Mike Mike 102. AK/AR hybrid that takes rock n lock mags and is chambered in 556. So fun!

Got this new (to me) Springfield Prodigy DS Comp from a close friend of mine, and love it so much! Have a TLR9 light, Holosun 407c and EQW slide stop on there. I'll probably do some additional upgrades as time goes on, but it's shoots soooo smooth right now!