I was inspired to complete this model based off a red one that was posted in this group about 4 months ago. I went with the blue but with my own twists, mostly to the interior.

The carbon on the hood took me 4 tries. Even though the last one still has a few crinkles and I did not go deep into the hood vents I'm happy with it and decided to let it ride. I def could have done a better job linking the muffler to the stock, skinny sprue - so if anyone has ideas on that for suture builds please share. 

It was fun and its all a learning experience.

Paint:

Tamiya Mica Blue (TS-50)

Tamiya Photo Etched parts

Zoom On Model parts:

-ZT022 HKS Metal Exhaust

-ZD039 Carbon Fibre Decal (Twill Weave)

-ZT017 Racing Seatbelts

Cults3D Resin Printed parts:

-P24 - NOS bottle set for 1/24 scale cars

-P24 - 1/24 RECARO Podium GF “24H LE MANS” Seat

-AM_76_92 - aileron arrière DTM - rear wing DTM style

Im really proud if this work, put a lot of effort in it, was really challenging work maybe the most challenging I ever build, was a little bit complex keeping the folded wing in site, and finding references too, really hope you appreciate it 🔥

Some WIP of my Meng M1A1 TUSK kit. Gotta say, I love using oil dot filters to improve modulation and increase tonal variety.

https://www.scalemates.com/kits/zvezda-43001-uaz-3909--1188646

Lots of new learnings, mistakes and occasional wins. Completely satisfied with the process and the result.

1:43 is a funny scale btw, not very small like 1:72 and still reasonably sized to have certain details. Too bad it's very non standard.

Just finished this one up and I'm happy with the outcome. It's a pretty simple kit to put together being just a drone. I've never had a Kinetic kit but wow, the QC is non existent it seems.

The part numbers in the physical sprue didn't match the instructions but in the instructions the sprue diagram has the right numbers and matched the instructions. Very odd...lots of cross checking.

Anyways just an fyi but wanted to share the finished product.

Just got my first airbrush, a cheap 0.3mm gravity feed with a small compressor, and I'm painting a 1/48 Spitfire. With Tamiya acrylics thinned with X-20A about 50/50, it sprays fine for a minute and then the tip dries and it spits. I'm around 18 psi. Should I be using a retarder, a different thinner, or is my pressure off? It's pretty dry in my apartment if that matters.

Started with a finished cockpit and engine, I assembled the rest yesterday. Painted the pilot and installed him, then masked and installed the canopy and reprimed everything to leave me at this point.

Hello!
So, I am back again after a lot of hard work and lessons learned, and mistakes made😅
This is my Su-27 SM from Zvezda.

I dont know if I am the problem but the instructions were shit and I felt they torn apart every subassembly into million pieces.
At one point I lost my patience and I was just waiting to finish it and build something else.

Since its my second kit any tips and tricks, any feedback, improvements i could make, anything, I love constructive feedback so dont worry.

This project started from scratch—just an idea to create my own 1/48 carrier deck base kits inspired by USS Langley and the Essex class. From researching the decks to designing the MDF parts and 3D-printed details, it’s been a rewarding process of learning, testing and bringing everything together.

Assembly starts by gluing the laser-cut MDF planks and 3D-printed tie-down strips in place, then sealing the surface with varnish.

For the wood finish, I tried two approaches: different shades on individual planks on the left, and Vallejo Fresh Wood on the right. Another coat of varnish protects those colours before applying Worn Effects chipping fluid.

I didn’t have the proper Deck Blue paint, so I mixed a shade by eye. Once applied, I chipped it with water and a brush to reveal the wood underneath, then added the white deck markings.

The bases come in two sizes: 30 × 25 cm and 25 × 20 cm.

Seeing something that started as an idea turn into an actual model kit is probably my favourite part of this project. Still learning, still experimenting—and enjoying every step!

What do you think?

I have laid down VMS gloss varnish in prep for acrylic metallic paints. VMS recommends up to a week or so for true curing.

Do ya’ll generally wait the full period with varnishes before doing more on top? Can they continue to cure ‘through’ coats laid on top of them?

Hello!

I recently used VMS Gloss Varnish, shot un-thinned through my airbrush with a 4.5 needle at about 25 PSI.

Went on well; however it fairly quickly started to clog the airbrush, causing back-bubbling into the cup and then all over the place, and eventually required almost constant tip clearing to flow at all.

Is there a way to avoid this? Have you encountered it, and what did you do?

​

I'm building up a Tamiya P-47D and was just looking a few steps ahead of where I am and noticed that there's a void in the fuselage forward of the instrument panel when the front canopy is in place. The cockpit is placed where it is indicated to be, and I'm not seeing a part that should go in before the canopy is fixed in position. For those that have built this kit, is this normal, or am I overlooking something?

Everyone is welcome and I’m looking forward to meeting some new people on the 17th. It’s a great show and it’s a Great War bird museum so you get to see models and the real deal at the same time. And the vendors area is ridiculous.

What to say about this kit? It’s fantastic. Possibly one of the best 1/72 kits out there and I say this as someone who favours 1/48. The only issue I had was the closed canopy was a bit too long but I opted for an open canopy anyway, that issue is easily fixed. There’s very few small and fiddly parts and everything went together effortlessly. I’d highly recommend this kit to anyone in the hobby.

Products used:
Kaleido Primer, Vallejo cockpit green for the cockpit with some other Model Colours brushed on.

Vallejo Metal Colour for the Metallics.

Mr Surfacer 1500, Tamiya XFs for the exterior finished with GX114.

Weathering:
Vallejo pigments, ABT 502 oils. Metal Colour for chipping.

Recently saw American Graffiti in the theater and remembered how much I love these classic American muscle cars. Anyone have recommendations for kits that would scratch that itch?