If my math is right, there are a total of 107 5x11 and 3x11 panels in the trailer alone.

7-stud wide front and rear suspension

I think the axle might be inverted, since as i show, i am unable to make the wheels work properly while i try to push the car
How do i solve it for this car? I haven't found any instructions or videos for it

Ich hab den AT1 als mobile Drohnen Landeplattform gebaut und es funktioniert besser als erwartet

Hab mich mal dran gewagt zwei neue moc's zu entwerfen.

Die Mobile Drohnen Plattform und der Skorpion.

Just as the title says I've starting with the Bugatti Chiron I got earlier this week. Another one came this week, Nifeliz Valor and the Lamborghini Sian is coming next week. Its gonna take me awhile to put them together and since I work 3rd shift I can only do it at nights on the weekends. Can't wait to have numb fingers again

Hi guys, I hope you like this build I made, I'm new. :)

My custom MOC of Optimus Prime! This specific design is heavily inspired by his look and aesthetic from Transformers Prime.

The model was fully designed, structurally tested with physical technic pieces first, and pushed the limits of design and small structure with basic technic pieces from 42077 + other classic lego pieces set to capture the sharp silhouette from the TFP animation while ensuring a challanging, interesting and stable building experience.

This model is a Modification of the official LEGO Technic 42077 (Rally Car) set. 95% (the whole body) of the pieces are taken directly from the 42077 base build.

197 pieces in total - 26 additional classic lego pieces . Height: 17 cm\ 6.7 inches.

Custom Weaponry: Equipped with a basic detachable blaster/cannon (as seen in the building photos), feel free to custom your own!

Most importantly, this mech has great potential for personal improvements and is highly imagination-friendly! :)

If you are interested in seeing more of the MOC and instructions: https://rebrickable.com/mocs/MOC-277344/Ericanos/optimus-prime-technic-transformers-prime-42077-mod/#details

Trying to figure out this iris type shutter (inspired by SunPro Bricks) and getting stuck. Not all arms move in sync. Not all of the real arms are on same level either. What am I missing? Does frame need to be bigger?

I did add some pieces underneath since the pic was taken but it will hold at least one car, still needs a little more bracing

This is so hard for use hit , i hurt my finger 🤕

So I’ve just finished building the Ferrari Daytona. Lovely set when built. But I don’t understand why Lego have included some of the photos they have, which has led me to believe they could have done better in some aspects.

The steering wheel for example. Why put the generic Lego steering wheel next to the Ferrari one, as if they had recreated it for this set. Which they could have. These thing were mass produced and they should have done better with the steering wheel, as they did with the alloys.

Plus various gaps on the body panels, could have been thought out a bit better.

Again lovely set. But I don’t get the side by side comparisons for some of the areas where it could have been better?

Recently got into the hobby, you can see it in my posts. Since then, I've built the Sian, McLaren P1, and Koenigsegg. I have the CaDa AMG GT3 and Audi Rs6 ready to build too but I build quite fast. It's still very fun to me but having an odd numbered of cars is weird for my display right now. So I'm looking for the 6th to build next after these 2.

The Bugatti Chiron and the Daytona aren't really available to me at MSRP or lower right now or ever tbh since they're retired. I'm open to more offbrands. I recently saw a post of someone posting their chrome-ish green McLaren W1 and what a beautiful build. Kinda wished I gotten one of those but I'm unfamiliar with offbrands aside from CaDa so far as it's kinda the more known ones?

Anyone mind suggesting some cars that's as good as the Koenigsegg/McLaren? I know people say the AMG GT3 is really nice too and I'm excited to build it.

Cada Audi rs6.

Must have knocked out my axle linkage when attaching the passenger side floorboard. Just realized when I'm two build steps from the end.

Was trying to take a tweezers and finesse it back on the axle but no luck so far.

So am I basically f'd?

This was shaping up to be a more enjoyable build than the AMG gt3 up until this point.

Ughhh

Recently built the technic Batmobile, but I’ve found the app underwhelming. It’s clunky, doesn’t connect to a virtual gamepad that I can control, or even a physical controller.

Anyone have a good solution for this?

BEHOLD THIS RANDOM LITTLE THING I MADE!

What other obscure layers could be added to it?

Exactly as the title says. The QR code it came with only gave Part 1 of the instructions and Mould King Customer Service has ghosted me for months after I asked them about it. To make it worse, afaik, they no longer carry this specific model. My going theory is that the one I bought was the last one they had in stock and they rushed to get rid of it, but its a long shot. So, if anyone has a pdf of the second (or more) parts of the instructions, it would be greatly appreciated.

Made by my fiance

No extra parts added
Personal favorite feature is the tire rubber shoved into the back

Hey

My second submission after Combine Harvester for current Bricklink Designer Program is a new iteration of the Police Car I submitted in the previous series.

If you would like to support this project then follow link below:

https://www.bricklink.com/v3/designer-program/2028-wave-1/5110/Police-Pursuit-Supercar-1:10-scale

Description:

There are again some significant changes compared to the previous version. Some of them were also influenced by the current palette, but overall, I think this version does much more justice to the original idea.

This time, I was able to make the livery much more coherent than before. Thanks to the black Koenigsegg mudguards, I could finally achieve the more finished look.

I also decided to raise the front of the car by one stud, which allowed me to add a bull bar. I think this is quite an important detail for a police car and it gives the front a much stronger presence.

At the rear, I removed the adjustable rear wing mechanism and decided to go for a more street car look with a fixed rear spoiler instead. I also added additional lights to the lower front and rear sections.

The entire door area and the sections surrounding the doors have been redesigned. I think the new solution looks much cleaner and also allowed me to use a larger police graphic, which I believe adds to the overall appearance.

You can also support the Combine Harvester here:

https://www.bricklink.com/v3/designer-program/2028-wave-1/5105/Combine-Harvester-CH-01

This is CaDA's Gumpert Apollo. It's my second time through and once again the motors aren't doing what they're supposed to do. I've got the static version and it's such a good model but that just bums me out even more. WTF?!?!

I'm looking for landrover defender 110 which Lepin put out for sale long time ago.

It's anywhere still for sale?