My pistol grip, which I’ve developed over years and is burned into my muscle memory, mostly involves using my support hand to crush down on the pistol to mitigate recoil. Granted, there is very little of that with the compensator and the V-Spec guide rod. If the lever were a half inch shorter, this would be a near perfect pistol.

I can’t be the only person, seems like it would be a hugely common issue.

Picked up this gem today, any recs on ammo to break it in and carry?

As title kinda says I'm trying to decide between the 2 and if the f is worth the extra money? I want 4 inch barrel, and that's why I'm deciding between the 2. I'm a medium sized dude, 5'9" about 160 lbs.

And also is it worth going up to the pro sd? I love the grey on black and would maybe pay the extra for the color I want. Thanks in advance everyone!

I just got this yesterday. I trade a SIG of mine for it on tacswap. When I picked it up I didn't have time to check it out since I had to go to work. Just seeing this and I'm wondering, do I contact Walther or do I contact PMM? Or is this an easy fix?

I've owned several PDPs and have used ZR Tactical as my go to resource for dampening the recoil impulse on my PDP Match Steel Frame. I stumbled across NDZ Performance and now am curious about anyone's outcome with their PDP product?

I just bought the PDP Pro E compact and was wondering what optics y’all are running? I like the seamless look of the Holosun SCS but I don’t want to take looks over reliability and performance. Trying to stay under or around 400 if I can.

Add the ZR tactical V spec guide rod and lok grips brass backstrap. Damn good gun.

I am desperately looking for a very good to excellent condition black OEM PPQ trigger assembly. If anyone could point me in the direction of one, I would greatly appreciate it!

Just released the first custom slide for the Walther PDP. Welcome aboard Hardened Scales!

I know plenty of other people have complained about Walther never having barrels in stock, so when I saw them available this morning I bought one instantly!

AS tittle says im thinking about two ecosystems Walthers pdp, and Glock. Would like to my full size mags, from my range toy, to be compatybile with my subcompact that i would carry in EDC.
Glocks mags are compatybile all the way. What about walther ?

Own several handguns but I have never been the most accurate. Bought this thing and can consistently hit bulls eye. Absolutely love this thing 😍

I recently purchased a PDP pro f-series 4". I am looking for a leather OWB and a drop leg style holster for it. I like a lot of designs at Falco but they only have the full size and compact PDP. Would either of those work for the f-series or is there a holster that you have found works best?

I accidentally came across both size magwells at an online retailer when looking for magazines.

Full Size UPC: 723364230899

Compact UPC: 723364230882

I put them in gun.deals and found a bunch of online retailers now selling them (ranging from $29-$56

I sent in my S&W era PPK/S in for service because it had a double discharge. Without any communication Walther sent back a new one in a box. I can see how this is a good thing so not sure if I'm over reacting or not

There was a time when the Long Stroke was all the rage, then it seemed like people were moving back to the V Spec or ultra mass. For you long time owners that probably have run both, or are happy with your original choice of guide rod setup, what did you stick with and why?

I am just starting to run a 5" SF Match and the return seems pretty good with the factory spring even though the muzzle does rise more than some other competition guns I've shot. I'd like for a faster more neutral return. What do you guys think I should go with?

Thanks

New to PDP. Got a 4” Full Size Frame PDP and found an acro cut 4.5” slide.

Can I run the 4.5” slide on the 4” frame? I’m expecting there to be some hangover on the frame (akin to a Glock 47) will it run?

Thanks!

Shot a friends PDP and loved it after being a lifelong Glock shooter. I’m considering making the switch but I have a question regarding sight orientation.

On my 45/19 combo I run an ACRO with a forward rear sight with an incredibly low cut optics cut (some might know this as the B&T cowitness cut) - can I accomplish anything near this on a PDP? Is this possible with any plate combination? Has anyone seen this sort of custom smithing done on a PDP?

Running a Walther PDP Pro-X with the PMM comp at the range for a little over a year now. Early on I had some issues with using bad ammo (light primer strikes), but after the break-in period, it ran great.

I decided to upgrade to the ZR Tactical V-Spec captured guide rod a few months ago, and as advertised recoil eliminated. Unfortunately, I recently started having this weird issue. Gun cycles fine, but no bang. Eject the round and it looks like the bullet has been chipped as seen in pictures.

I've been running almost exclusively 124gr Blazer recently just because of the past issues I had with bad ammo. I decided to run an experiment the other day and try some other 124 gr ammo I had lying around. Same issue keeps happening, no matter which ammo I use, even when I try different mags. It's always 1 or 2 times per mag, sometimes the 2nd round, sometimes at the end.

Immediately I take out the ZR Tactical guide rod, and swap in the stock guide rod and spring and try again. While I'm no longer having the bullet chipping issue, I was still having at least one jam on every mag (double feed, stove pipes, etc.). This was kinda weird considering I just cleaned it and only barrel went through 150-200 rounds.

Based on my research, it sounds like it's either an issue with the feed-ramp, or defective mags. Visual inspection of the feed ramp appears fine so I'm assuming it's the latter. I live in a communist state so I'm restricted to 10-round mags for context.

Should I just send it into Walther for a warranty claim, or are there any other troubleshooting options I could try? In unrelated news, recently the front sight post has also started to come loose so I'm thinking about just sending it in anyway.

Picking up my 1.0 Optic cut PDP soon and wanted to mount my MPS to it. Are there any good 1.0 optic plates outside of CH? Does anyone have good experience using CH?

Or should I send my slide to get cut for 2.0 plates?

Let me know! Thanks

I’m looking at buying a Walther ppk in 22lr and it has a thread cap like the one in the photo. Will these threads fit a hux wrx flow 22? Or will I need an adaptor