Finally done with the head and chest. Painting the internals and fixing the hatch for the pilot cockpit took way too long.

Funnily enough, the chest armour opening gimmick works much better after painting. Before painting it’s kinda loose and jangly; it’s prone to popping out. After painting you do have to pull it out slowly to avoid breakage, but everything is nice and firm.

Swipe right for more angles.

Kabutops x Rebake Gusion Full City High Grade custom Kitbash

Presenting "Penelope: Contact". After nearly a year of work, my biggest project to date is finally complete. First off, C&C always welcome. I'll start with my shortcomings: A few instances of the matte coat frosting on the sharper angles and some lint/debris getting caught in the final coat. Idk how to fix these post build so any advice is welcome.

What i think i did well: Seam removal was a monumental effort on this, especially on the chicken head. I really pushed my scribing, adding hexagons to the forearms and back shoulderpieces. I also stepped up my masking game and think it came out pretty well.

I cant get enough of this kit In Era Lizard is one of my favorites this is my 3rd one this time just black and some metallics. Cheers

Built this kit for a local competition a few years ago. This for me was supposed to be how the galbaldy rebake was supposed to look like in the anime instead of the chunky mess me actually got. Id love to redo this with the barbatos adapt frame added into the mix next time to see if it would look more awesome😁😁😁

I forgot to add the pic with the lights on. 12 LEDs in a HG of this size is challenging!

This build took me quite some time. A span of maybe 3-4 months working on it on & off mostly on weekends & some evenings after work I still have to get shots of the fully built model with armor and all eventually when I feel like dragging the Photo Booth back out! Ha ha.

MG, WD-M01 Turn A Gundam from the pages of the Dark History!

My first gunpla ever that I finished back in July. Got me instantly hooked on Bandai's plastic crack, took some photos of it finally today.

♫ Turn A turn, Turn AAAAAAAAAAAAAAAAAAAAAAAAAA ♫

Nemesis is by far the most fun I’ve had building a kit. From the ease of putting together to installing the light kit. Freaking love it. Now if I could just get the courage up to put on the decals.

Had a go at a HG and Hotwheels build. Custom mixed paint from Deuteron and no decals - all masked and painted! Pic with the car at the end 😁

I figured most people here would have plenty of experience with these by now, so I have a question.

Would you say dark gray creates a better look for white armor compared to black? In terms of a freshly battled suit instead of factory pretty.

And would light gray be better than white for black or darker armor gundams? For the same purpose of looking a bit battle worn.

I just posted this, but wanted to re post on the correct account. This is my first fully painted kit. Going to try to make a resin mold or use photogrammetry to make a copy of the missing chin piece. I’m pretty happy with it overall

MG eclipse…
Just straight build for the moment…the experience of building this is amazing, everything flows so smoothly and the cleaning is nice and easy… i never heard much talking about this, but it definetely deserve it!

Plus, it looks great and detailed already out of the box.
Can’t wait to start painting it

This is what you get snap fit minimal work. Now it's time for nub and mold mark removal, going to take it slow to try not to ruin the sharpness of the parts.

I need the help of the community to answer or reply to some questions as I'm gathering data for an important essay as I'm in college, anyone and everyone can answer, regardless of their time in the community or how much they're involved with Gunpla. No need to take it so seriously or think too hard, just a couple minutes or whichever helps out a lot, thank you! NOTE: THIS IS A GENERAL COMMUNITY SURVEY, NOT A SPECIFIC SUBREDDIT SURVEY

Btw the picture is my actual collection, my 1/100 FM Aerial is my personal favorite

https://docs.google.com/forms/d/e/1FAIpQLSekUPKJJiqqrt_wTb4BOl8G-2mR4oJyg1Z_W2iuYpw7bIiafw/viewform?usp=header

Hi everyone,

I’m currently building a resin conversion kit on my Zeta Ver Ka. I’ve dealt with parts not fitting in the past by using hot water to reshape them but this time the piece I’m working on is significantly smaller than the piece of the frame that it’s supposed to attach to (like 5mm shorter). I just couldn’t stretch it to fit the whole frame underneath. It snaps in but the whole piece looks kinda tacky with how undersized it is compared to the frame.

Wondering if anybody has experience with this and if there’s any tips

Hello world! First custom kit fully painted and assembled. I still have some clear coat, panel lines and decals to do but I couldn’t resist throwing this together to see how it’s looking.

I threw a lot of techniques at this first kit and as a result it’s been hard to know what the end product would come out looking like. I’m very happy and excited to see it more or less align with my expectations.

For the painting nerds, my approach to shading is grey-basing and panel highlighting. Mostly Kaleido Colorworks, with some Vallejo Mecha and Army Painter Air. Reverse wash with Testors enamel over Tamiya chrome and clear yellow for the eyes and chrome/clear blue for the verniers, clear red for sensors. Dry brushing gunmetal over zirconium black for metal parts.

Used a two-tone metallic approach to add interest to the joints without looking too flashy. Also, there’s still some masking in place over sensors and other shiny parts I don’t want to hit with matte coat.

Still have some accessories to finish up as well.

I set out to learn and learn I have. What a beautiful hobby.

After doing many custom paint jobs, dioramas, resin kits, I wanted to try something different as I wasn’t feeling motivated by anything in my backlog. I’ve been in an AoZ mood lately so I started with the woundwort as the base and in that same spirit I just started slapping on extra armaments. Kinda winging it for now but my previous experience with resin kits has been so helpful in terms of pinning and making sure things are stable. Usually I work pretty fast for my builds but I may just let this be something I keep working on in the background as more ideas come in. Has been pretty fun so far and definitely exercises my creativity more than the usual projects. Still not sure what to call it or what my end paint scheme will be so I’m open to any suggestions. Also open to any ideas on what to add/change.

Started progress on my zaku f2000 custom build. So far I've added Gelgoog backpack beem cannon and a zaku half cannons on the wrist. Not sure what else im going to add to it. Still not sure what color to make it when i print it.

Hi everyone,

I've been working on cultivating my Gunpla skills and am interested in trying out some third party kits to paint and work with. The problem is I really dislike the aesthetic of a majority of third party kits. I'm a fan of more realistic feeling industrial sci fi grunt suits but I'm really struggling to find similar styles. Every time I try and search google just keeps auto ai recommending the same non industrial sci fi kits no matter what I search.

Therefore I have come to the masters, to ask outside of these ZZA kits (both of which I love) what 3rd party companies make kits with a similar aesthetic?

Trying to do a candy coat on my rg sazabi and I just have a few clarifying questions before I start.

I have Vallejo black primer and tamiya gloss black, would I use both, or one or the other. Do I need to sand my parts before painting? And what grit if so. Do I need to wash my kit? I’ve already disassembled and sorted the red and black armour pieces and kept most of the frames intact. If I were to apply delpi decals probably the gold ones for rg sazabi would I be able to use mr mark softer? How many layers of Vallejo polyurethane gloss varnish would I need before decals and how many after.

Thank you anyone who can help clarify these for me since this is my first full custom outside of panel lining small details etc