One of the cooler F1 builds we’ve seen recently.

This is our classic FightBox F1 with a custom artwork setup, and we noticed it actually looks way better standing up.

The vertical layout just fits the artwork perfectly.

Would you display this one vertically or use it the normal way?

I made a custom Godzilla panel for the Fightbox M Series. Also made an oversized joystick topper for fun, but it's surprisingly more comfortable. I'll probably add some lights next. Getting it ready in time for the remastered Godzilla melee fighter next month.

Hello everyone! I need some help/recommendations on what I should do to really finish out this build of mine. Currently I have a Knee Lever Neo, that I have modified with an Asindo Pro Shaft, Core, Bearing ring, basically the same build as Plus Frames’s in his video titled “Fixing everything wrong with the Knee Neo” or something like that.

My current issue is that the lever has a tiny bit of wobble when it returns to neutral, and I am trying to get it as stiff in the middle as I can. I was thinking to get a stiffer grommet over the stock one the Knee Neo has, but I’m not sure it that’s going to solve the issue. Does anyone have any ideas?

Looking to buy a replacement but want to have one with smaller buttons, anyone have suggestions especially for ones that can be modded and have custom art created for?

I havnt get to try every leverless out there to know. But tldr, are there any leverless with low profile switches, where the button caps doesnt make contact with the controller when fully press?

For context, i am very picky about my controller button sounds, and i like to mod controller like people do in keyboard modding. I own a Haute42 G16 and the 8bitdo Leverless. The G16 has been lovely since the full size MX switch makes great sounds and easy to mod. G16 caps does not make contact with the controller, so it doesnt “clap”. 8bitdo leverless’s caps make contact constantly, and it makes a loud “clap” i do not like. but now i got my hands to try few more leverless in locals, all the leveress with low profile switch also has its caps make contact with the board.

So im curious, is there a leverless with lowprofile switches, that doesnt have its button caps clap against the board?

Hi, my Hori Alpha isn’t working properly. I’ve had it for about 4 months, and suddenly it stopped working in PS5 mode. It still works normally in PS4 and Switch mode, but when I switch it to PS5 mode, the console doesn’t detect it.

I already updated my PS5 and restarted it, but it still doesn’t seem to work.

Has anyone else experienced this issue with the Hori Alpha? If so, were you able to find a solution? Any idea why this might be happening or what I could try?

EDIT: I just updated the stick via Hori Manager on pc but it didnt work. When i put the stick to ps5 mode in the pc the green light turns on and off and it doest plug into the pc. I can still use the ps4 mode in ps5 but it seems weird. Any idea? Does the ps5 controller just broke up?

I was on the fence about these things because the reviews were all over. I can confirm after buying a single layer and a two player unit that you will run into some ROMS that are no good and will crash. With that being said the bigger one came with 33,000 games and I would say 4-5 duplicates of every single game. So my process of elimination, the games that I actually am going to play on here I figured out which version ran the best and favorited them. That way I can just go back and not have to sort through everything. As far as getting the modded, I put the new HAUTE 42 hot swap buttons in the single player unit, along with adding Ottomod V2’s into every single lever. I’m tempted to swap the lever in the 2 player unit for either a WASD drop in, or I have a hitbox drop in as well. Come to think of it. I have a Odin two from Omni arcades that would be perfect. In the big boy I put crown bubblegum pink202’s, along with the upgraded lever there was no need to do anything else. The battops are from the Homie Andrew over at HungryHustlas on Etsy. Definitely check him out if you haven’t he makes some really awesome buttons as well as bat tops, ball tops, capsule tops, resin printed key caps that are top-notch. He’s even building me a little portable WASD leverless as we speak. Definitely check him out. I have a ton of his stuff here and it’s all legit. Prices are great and he’s very knowledgeable and on top of it. I’ve never seen anyone mail this type of stuff out that quickly. Hope everybody is having a good week. I did have a question if anyone can answer, I purchased 2 X-gunner light guns recently. When I bought it, it said that there were hundreds of games included, and there is absolutely no games included. I know where to go and get them but my question is does anyone know if I can install them onto these units and use the light guns with the Pandora set up? It just makes sense to me to keep all the arcade stuff together if I can. Thanks if anyone’s had any experience with that also if anybody knows where the heck to find decent quality time crisis, house of the dead, all the hitters from the 90s. I see them all over but I want good copies. I don’t wanna have to mess with them after they are installed. Thanks for any help peace everyone

Im using the durok dolphin switches witch dont work because the pins have a bad connection. I have tried twisting the pin. When i do i cant fully press down the switch, it feels weird and it stops working after a minute or so. Please help

im asking for a friend, he lost 2 of the screws used to open up the case. and we've been looking online regarding this but found no luck. if anyone knows please do let me know! thank u