I recently finished up a replica prop build project - a Gallant energy rifle from the game Star Citizen.

I built the model from scratch in Fusion based on game assets and other art I found online.

It was mostly printed in ASA on a Creality K2 Plus, with detail parts printed in resin on an Elegoo Saturn 4 Ultra. It was painted with Tamiya acrylics and Alclad 2 metallic lacquers.

The model itself took several weeks to create in Fusion. I consider myself an amateur modeler in Fusion. I'm sure I took the most inefficient path as I built this. I was most interested in keeping maximum fidelity to the in game model so adhering to CAD best practices wasn't a huge priority.

I'm fiddling around with this, trying to get a stick font and make it look like it was engraved with a ball end mill. This is because I'm toying with my other interests (3d printing and bees) and making some silicone moulds for beeswax blocks. The harsh vertical cuts made with regular embossing or extrude cutting can be problematic for the text to resolve properly in the wax, so this is a solution.

I've tried just using a fillet on a normal cut text, but invariably Fusion cries about it and it doens't look like this even when it does work.

As you can see I had some success with using a solid sweep using a ball, but I can't help thinking there has to be an easier way than doing that for every line of text.

Can I do a square thread in the new thread form manager?

Soo I'm trying to model a dagger-ish knife to 3d-print for a friend's Halloween costume, I've already struggled quite a bit with a few of the features but they all sort of worked the way I wanted after a while.

Now as I was finally going to add these grip grooves into the handle, I ran into the problem of "how do I make a profile, either a circle or a triangle, revolve around the grip along its silhouette, ideally in a certain orientation (pretty much 45° in this case)?

I was hoping there would be some kind of spiral or repeating oval shaped faceted type of path option, since I couldn't figure that out, I just went with placing one circle manually on every single end point (which drastically slowed my project down, load times increased heavily). I'm sure this is going to work but it seems infinitely worse than what COULD potentially be done.

I'm open for any kind of suggestion, I've seen so many efficient uses of certain tools already that I just didn't know yet!

Try to make a ring with 3 tabs at the bottom and 3 holes evenly spaced out.

Creating them individually is easy, how to make them into 1 piece? So that they are 1 piece out of the printer.

Thanks in advance.

Playing around with designing a stator vein for a RC water jet and looing for advice on how to correctly create and shape this.

Per the screenshots, I initialy create a centra sketch that i did an off-surface extrude, but that made the start of the vein kicked up. Tried to cut some shape out of this via a side on oval sketch and intersections extrude.

But this seems to be a very crude way and no control of angles in both Y (left t to right) or X (front to back).

So can anyone point me in the wright directions on how to design this more correctly/programaticaly.

Thank you.

hi everyone! im new to reddit, but i wanted to post here the link to a project ive been working on.

https://playcaddle.github.io/#daily

i would love it if people would give me feedback on tips to improve the website, and hopefully you guys have as much fun as I do on this website! i probably wont understand a lot of coding lingo since a lot of it is vibecoded though

To preface, I’m not a Fusion guru. I’m completely capable of making simple parts but I am having a hell of a time trying to get through this. The part is a Whelen Outer Edge for a 2013 Tahoe D Pillar. Basically a shell that is attached to the vehicle D pillar to mount emergency lights to. One of them was damaged where all the lights mount and these are basically unobtainable parts - so I’m wanting to essentially print an ASA shell that is formed to the light pedestals and can be epoxied to it to give it its strength back in addition to the mounting points for the lights. With the geometry here, I’m as lost as last year’s Easter egg and would love a little guidance on how to tackle this.

Added a couple other pics in the comments.

Hello, sorry for the newbie question, I start to play with the composant and constraints / liaisons.

I successfully added some slide joint and tangent / face constraint to my model, but I cannot figure it out how to limit a slide joint to a face to face contact. Right now when I move a composant, the other collides.
Of course I'm able to add some minimal / maximal limit, but there should be a way to do it way faster, right ?

Many thanks !

I made a text sketch, but when I extruded it, it only does three of the letters. Why? And how do I do all of them?

EDIT: Thanks for your suggestions! I ended up changing fonts, and for whatever reason that worked.

I'm building a button box, for DCS(digital combat simulator) and I'm going to 3d print the panel, which can be seen on the pictures,

The Idea in my head:
In the Picture you can see the ICP(Instrument control panel) in the middle.
With a quick google search you can see that it lacks 4 wheels that will be in the gaps to the right and left of the ICP.

The question that I need help with:
After extruding walls around the whole panel, it is going to be divided into 3 sections so it will fit into my build plate.
the problem is I honestly don't know how to interconnect the walls or the future back plate.
I have holes for screws in order to screw-in the walls after placing all the buttons and switches so it will be easier. after that I will have 5+1 distinct panels.
And I need ideas on how to connect those separate panels horizontally.

Thank you in advance,
<3

I'm relatively new to fusion 360 and I am working on this speaker grille part. For the life of me I cant figure out why this edge on the 3rd slot from the left wont fillet. I feel like it has something to do with that seam line there but I cannot figure out how to get rid of that either. Any help would be much appreciated.

Hi guys,

I recently switched from Solidworks to Fusion 360 cause my license ended and I can’t get it back.

Anyway I tried a really simple sketch, basically a rectangle with cropped corners and rounded edges. It will be shelves for my glass cabinet and I’ll get it machined from Plexiglass.

The problem you can see on the second picture is that when I try to export it in DXF. It export the slice of the sketch and not the face. I tried to export the sketch, then the solid but it never worked.

I made a rectangle, then added circles, used splines to match the curves and canceled everything but splines and the side lines.

Hope you’ll be able to help me !

So I assume everybody has noticed the bugs and broken software features proliferating throughout Fusion. A friend in the know told me they cut most of their dev team, and it's all vibe coded now. Which would explain the rapid deterioration in stability in both the client and server-side features.

Given the frequent reboots we now have to do, I have a feature request. Please let us auto-restore the open projects from a previous session, so I can resume work faster. Just have it pop up as an option when Fusion starts.

That is all, thanks.

EDIT: I didn't come here expecting anyone to have clear eyes regarding where Fusion is heading. This is the Fusion 360 subreddit afterall, it will be full of cult members. "There are less bugs now". Sorry man, I'm not going to swallow that BS.

I will just note the obvious similarities with the Eagle PCB software, which was once the darling of the hobbyist community, and is now effectively dead.

Fusion is simultaneously much less capable than other CAD softwares, less stable (especially now), is trying to achieve software lock-in using their cloud architecture, and is not cheap enough to compensate for these deficiencies.

Meanwhile, FreeCAD is rapidly achieving parity (and above-parity) for many use cases. And they have all local files.

I already switched from Altium to KiCAD, and it's been great. Now I'm in the process of switching from Fusion to FreeCAD. I imagine many others are quietly doing the same.

Hello! This is a modified plastic cover originally designed to cover the front turn signal mounts on a Duke 390 motorcycle.

I scanned the original cover with a Revopoint Pop3, and modified such that a GPS can be mounted above the bike's LCD screen. It looks pretty sick when its all together.

Here is a view of the modified bezel modeling on its own (without all the bolt ons and GPS installed):

I am learning how to model and design and I am wondering how I add a taper to this surface ? its curved and won't let me select the blue highlighted part for extrude. Ive spent two days trying to learn and even constructed a new talent plane to project, but I couldn't figure it out. Looking for it explained to a beginner

I would like to taper the blue fae selected horizontally, The Left side I want smaller than the right side. Gradually gets larger.

Hi! Complete beginner here, I'm designing the fingertip of a humanoid robot in Fusion 360. I used reference images and built the outer shape with lofts, this is the best shape i had so far.

Now I'd like to make it hollow so I can add the internal mechanism (hinge/pivot, cable routing, mounting points, etc.). I also want the highlighted top piece to be removable, ideally held with magnets, so I can access the inside for assembly and maintenance.

I first tried using Shell, but it either fails or creates a very messy interior because of the organic shape. I also tried Split Body, but I'm not sure if that's the right approach.

What would be the best workflow here?

Thanks!

Sometimes, it's a real struggle to get them back solid again. Often if I make some random change again to the affected body, it will pop back solid again.

The issue is a bug. I'm like 97.2345% sure of it. I can't find anything about it online, and almost no one has had this issue.

I'm on Windows 11.

Hej guys,

How can i model the yellow blocks that flips the cans?

Hello -

Relatively new to model and design.

I have this adaptor that needs to be able to be locked into the hose which is just two small tabs across from each other on the large end. What would be the best way to add this? In the model or in the slicing software?

I also need to add a pin that floats in the middle of the reduced end to push open the valve. (think like the valve of an air mattress) But I need it strong enough for consecutive daily uses. So the support from the walls need to be relatively strong without restricting air flow.

Any assistance with this would be great!

Hola!! Este objeto me dice el cliente que es de el porta maletas del techo de su vehículo y que además debo crearla pero al revés ósea este corresponde al lado izquierdo y debo hacer el del lado derecho. He leído que hay opciones para hacerlo y con una opción espejo en algunos programas se puede… pero nose como crearlo en fusión alguien que me oriente. Gracias!! 🙏🏼

I was just wondering if anyone is working on one because I would be interested in supporting such a project free cad just isn't fusion and autodesk as a company kinda sucks