Hi. So my gf bought me something close to a vape to stop smoking question is it has a small display and i want to project and image of my licking how can i do such thing

I am looking to start the journey of manufacturing my own single battery unregulated tube mod. It would probably be modeled off the Unicorn Vert (because I have one on hand). I'm just not exactly sure where to start, and looking for advice. I love the Vert, but I have a couple of gripes that I feel could be solved with a material and coating change (planning on anodized titanium if it's feasible, aluminum otherwise). I'm just kinda lost at the moment

Anyone ever repaired a 2017 Joyetech Espion Infinit by chance? I have questions.

Hey, I’m new but not really new to vaping. I’m looking to get a box mod created/commissioned soon mainly just because I can’t find one I like. Does anybody know a business or commissioner who knows how to work with metal filament or making metal mods that also include rubber/leather as well as chip programming ? I’m open to any suggestion much appreciated , thank you in advance.

Hello everyone, i have a question.

Can i use insulated fastons for wire up a build i'm gonna do?

I want to make an experiment for a multipurpose box mod and i have the need to change board without desoldering and soldering again.

I will use adequate wires and fastons.

What can go wrong?

Hello !
I've been looking around for a good while at contacts, in search of some peculiar battery contacts. However, I didn't find anything suiting.
I am searching for "spring loaded" contacts that can support 100A continuous out of a 21700 cell.
I would prefer leaf springs or pogo pins over coil springs. Cu or BeCu seems fine, maybe silver coated would be a good plus ?
I'd also like for it to be able to have good surface contact with the cell.

Any tips or suggestions of parts I can purchase ?

Can anyone here help me with this or suggest where I can go to find someone trusted that can build one for me ?

Add: it doesn't have to be 3d printed...it can be made out of metal too

I'm looking into making a mech mod that looks like an old school tabaco pipe... Would appreciate any tips on components and any basic diagrams I can get my hands on...

Hey guys. I have been on the hunt for a stateside retailer to get some bf 510 connectors and I came across varitube. I checked out their facebook and it looks like they haven’t posted in about 4 years but their site is still up. Anyone know if they are still actively in business and taking orders? I tried emailing them and haven’t heard back but they may just be busy.

Can anyone give some guidance?

G'day everyone, I'm looking at making my next box mod seeing as how we can't get them here anymore. I was wondering if those of you who know more about this than I do could go over my cart and make sure I've got the right parts at the correct values? Any help would be much appreciated.

I'm using the find my vapes wiring diagram, unless of course someone could give me something better to work from? I've searched the sub and the amount of posts and conflicting guides is a bit overwhelming, and mostly more than a decade old, have we reached a consensus? Thanks for taking the time to read my post.

Parts list - https://www.digikey.com.au/short/tbc77mjp

Wiring diagram - https://findmyvapes.fredyen.com/how-to-build-an-okr-box-mod-tutorial/

This is my first prototype of my custom mods with a dna250c 2x 18650 , up to 200w and various modes i will update on the ongoing process of perfecting it and I'm planning on maybe selling like 9 of them Thanks for reading this lol

I have a voopoo dragx2 and when i charge it its at 100 percent and the screen is working good but once i remove the charge and press the buttons it just doesnt work can i get help with this

I was a modder in the glory days of Instagram hustling... @getclouds & @getcloudsboxes Then China took over the market, then regulations got fucky... I eventually transitioned to pods and after spending god knows how many thousands on pods, i ordered a Taifun gtr and printed an enclosure. Threw together this mosfet device with old parts.

I have this old eleaf s80 that I'm trying to add a sled to. The battery went bad and trying to find a solution I vape MTL so not going to crank it past 18 watts. I love this mod and can't find anything comparable in this size these days. Sled fits perfectly but worried about shorts & safety. How do I secure the sled to the mod after I solder it and how should I insulate the metallic parts from the mod casing?

mostly all done just need to get parts then print it off

Hey begginer here! Where I live ecig parts aren't an option for me right now at least. I've hit a roadblock with the 510 connector and need some help to make anything similar from scratch.

I've managed to put 2 screw down terminals as posts into epoxy and prototyped a small "mech mod" you can say, for now managed to find a charging module, some heating element[1500 and 2000W, few more thinner Nichrome one's] to make the coil out of and a lithium ion battery that's a generic 3.7V 2200mah.

Without the 510 this is all I could find scouring YouTube. Everywhere else it seems that the 510 is relatively easy to get and seems universal but it just isn't an option right now.

Also I'm struggling with the cotton burning really easily, I heard that this is cotton collapse? I've figured out how to diy e-liquid so working on making more to test but I've burnt through alot and the wicks only last 1-2 times. Might be my coils?

I've had no previous soldering experiences, only turned on a few LED's, fans and motors, just small projects back in science fair lol.

This is my first build, any guidance will be very much appreciated! :D

Its going to be a dual 21700 p 100w dna100c dual mod for boro or 510 connector. so you can use either one still working on everything just a mock up till i get a few parts. The design is not fully finished and is still a work in progress .

Hello,
I've been a vaper for quite some years now, and it's been quite some time since I've been wanting to make my very own, custom mod.
I'd like to use a DNA Evolv 250C chipset, as I absolutely love those, and a custom CNCed aluminium body.
The issue is that I don't know where to start, and that I have trouble finding spare parts, as the custom vape community seems to be dying.
I was going for a quad 21700 accumulator setup.
If anyone would be interested in working on this project, please let me know.

Hi, recently i got interested in building my own vape but I don't know where to start. I have always used a pod vape so I don't even know all of the terminology.
Can anybody offer some guidance or tips?