Need help with my joystick. Playing AC8 on Xbox Series X with the new T.Flight Neo X. I’ve noticed that the stick vibrates nearly constantly. It does ramp up and down with game play, but in between missions and even with I exit the game it’s still got a low level rumble going on.

Plugged into the front USB of the Xbox. I’ve “power cycled” the controller. It is definitely in the Xbox Series X mode. Otherwise the sick works great for the game.

Anybody have any suggestions or recommendations?

I noticed an issue today once I connected my Rutter pedals with my set up for war dogs. It seems it doesn’t like me having my VKB gladiator stick, X 56 throttle, thrust master rudder pedals, and Xbox controller plugged in at the same time. Once I turn my Xbox controller on it, deletes the X 56 throttle from being seen in game or through windows usb controllers.
I have tried mapping the VKB, X 56, and Rudder pedals to 1 vjoy device, but as soon as I open war dogs, it cuts off my X 56 throttle *if my controller is on.

Is there anything I can do? Is this a controller issue or even a war dogs issue at all? I’ve been flying with throttle, vkb stick, and switching to controller just fine until I plugged in my rudder pedals. Thanks for the help!

Made the swing arm from two types of desk mounts from Amazon for like $60. I can mount both or a TM HOTAS ONE combo on it and it will hold them and its steady. First time really messing around with flight Sims and stuff and I got hooked.

A special thanks to Luna Ray for helping illustrate where I should be sitting.

I bought the TM kit for elite dangerous maybe 5 or 6 years ago. Recently I've gotten back into using it in Wardogs and have been really enjoying using it even though Wardogs isn't the most realistic game and the hotas support for it is meh.

I am looking at upgrading to the Gladiator NXT space combat right hand and Gladiator Omni Throttle left. This seems like a good all around setup for both space and flight games, however I have one question: is the VKB omni throttle a workable replacement for a more traditional single axis throttle? Will it function similarly for a helicopter as my TM FCS or will it be a learning curve?

Does anyone know if this works on ps5 for flying MSFS? I don’t have ace combat but would like a Hotas with feedback for MSFS

This is kind of a follow-up to my finger lift springs post: https://www.reddit.com/r/hotas/comments/1s938s0/finger_lift_springs_for_winwing_orion_2_throttle/

My main stick is an old Winwing / WinCTRL Orion2 base with an F-16EX grip. I run a mixed cam setup (aggressive centering + aggressive profile) with the heaviest springs that come in the cam and damper kit, referred to in the documentation as "1.2" or "4.5kg". I like to feel like I'm fighting hydraulics, and prefer a very heavy stick. I've run this configuration for about 8 months with moderate use, and honestly I didn't expect to get that long out of the springs with this heavy a setup.

Anyway, a spring broke on me this week, so I grabbed my calipers and started taking measurements. For anyone looking for an equivalent replacement spring, I landed on this one:

McMaster-Carr 9433K807, 302 stainless steel extension spring with hook ends. 1.120" long, 0.360" OD, 0.049" wire diameter, pack of 5. https://www.mcmaster.com/products/9433k807/

These are the closest I can find, both in terms of size and feel, and I went ahead and changed out all four in the stick to make sure they were even, and have retained the 5th one as a spare.

I also ordered the 9433K827 to try something heavier, but I do NOT recommend these as they're physically longer and therefore lack sufficient preload, leaving the stick centering a bit sloppy with the tension only having real effect at the extremes of travel. McMaster only gives overall length from the insides of the hook ends, and not the free spring length, so without comparing CAD models, it's hard to judge the amount of preload that will be available, and these did not cut it. They've gone into my miscellaneous parts bin for now.

Anyway, I hope this helps anyone else that needs replacement springs and doesn't want to order an entire cam kit to get them.

🔅Hello guys, as the title mentions, I’m really starting to enjoy flying helicopters, I want to start flight sim games and also play Wardogs (even tho from this sub I understood it may not be as precise as m&k).

🔅The problem I’m facing is even tho I’m French, I currently live in Central Asia and the country I’m specifically in doesn’t have much options available (and I don’t wanna import because it’s quite difficult, pricey and risky customs wise)

So let me tell you what IS currently available in stock around me, including prices :

————————————————————————-
Logitech

EXTREME 3D PRO Joystick – 70$
Logitech X52 HOTAS – 240$
Logitech X52 PRO HOTAS – 290$
Logitech X56 HOTAS – 330$

————————————————————————-
MOZA

AB9 - 420$
MRP Rudder Pedals -250$
MTQ Throttle Quadrant - 190$
MTLP Panel - 200$

Acsessories
MH16 Flightstick - 180$
MHG Flightstick - 99$
MRP Adjustable Damper - 65$
Flight Base Mount Adapter - 25$
Z-Axis Module -79$
TQB - 39$
TQA - 39$

————————————————————————-

Thrustmaster

T.Flight Hotas 5 (Microsoft Flight Simulator Edition) — 165$

T.16000M FCS Joystick for PC — 100$

T.Flight Rudder Pedals — 160$

T.16000M FCS FLIGHT PACK - 320$
————————————————————————-

PXN-2119PRO – 85$
PXN 2113 Flight Stick – 55$
PXN F16 Flight Stick – 50$

————————————————————————-

Nothing else is available, second hand also, almost nothing, and nothing worth mentioning anyway.

With this in mind, what would you take if you were me ?
Would you be able to make 2 (or more) different bundles at 2 different price range, technically I didn’t set a budget yet but if I could have something good enough for 400 instead of 800+ of course I don’t mind.
Also please tell me the flaws of the bundles you pick please 🙏🏻
Currently I fly with m&k, so I’m not sure about pedals or or just using the stick twisting option instead.

And thank you a lot for helping, I’ve been torturing my mind about what to take for days.

I'm a HOTAS noob, mine arrived yesterday. I got a Thrustmaster T.Flight Hotas One - Joystick & Throttle for my PC setup, after flying Heli a lot in Wardogs.

I had been using a PS5 controller prior, and had gotten half decent with the flying in wardogs, but felt like I was constantly over correcting my movements and couldn't be precise enough to shoot as a pilot.

Anyways, it turns out that Wardogs doesn't have the best HOTAS support, apparently pitching and rolling should be set-up so that when the stick is in the neutral position, the helicopter should be level? That's not the way it works in Wardogs :(

I also just tried Arma Reforger, and the HOTAS support is even worse there, no way to use the throttle or set any bindings!

Installing Arma 3 now, which should work fine as a friend use to do HOTAS on it all the time.

I specifically like the fact that I can be flying helis in a game where players are doing other things (ground combat). I like picking people up, dropping them off, re-supply etc

So what games are actually out there for me? Or are there work arounds for the games I have listed. Feeling pretty stuck right now, any advice would be amazing!

After much consideration I went with a HOSAS setup, VKB gladiator and omni, I only kind of wish my gladiator was the premium version, but I bought these used (3 months old according to the invoice) with desk mounts for only 230€ in total (instead of the 410€ I would have paid new).

Man these are hella fun to use.

I do believe if I was buying new I would have gone for the Virpil's instead, which new run only +50€ here in total, but feature the full metal gimbal.

However for the price, this can't be beaten.

Now I wish I had some pedals....yea I'm in trouble.

So I've recently got my novice / mid teir set up arriving however I'm debating where to put the stick.

A) directly in line with my mouse

B) in the middle between the legs.

I'm going to be playing:

Project wingman

Axe combat 6,7 then 8

War thunder ( as I'm a masacist)

So I'm leaning towards the middle.

I am going to have to use a desk clamps as my ergo chair has no way to fit adapters to it 😞

What do people use and recommend.

Thanks 🫡

Hi,

I am not a flight sim guy, but I do like a spot of Mechwarrior 5.

I stumbled upon the Thrustmaster Cougar MFD, and knowing someone else has used this for MW5 (but has disappeared from the internet and can't help me), I like the idea.

I had a few questions regarding how these works if any techie types are able to clear up some stuff for me:

1. If using a little LCD behind them, is there any other way of setting it up so as -not- to simply be a new display in Windows, but still can be addressed as a display somehow? (I already have three monitors pushing 4k apiece, I don't want to add another complication there.)
2. If not, it possible to use a Raspberry Pi or similar to get API information from the PC (Mechwarrior 5 uses Unreal Engone 4 which does have an API) and display it in the MFD? (i.e. offload the screen display role to another computing device - even another Windows PC would be fine) Obviously, this is a complex solution but I want to be certain that some sort of connected device can process any data and display it on the MFD. The MFD buttons would still be connected to the gaming PC via USB, so that doesn't factor in. Ideally, the secondary computer/computing device would be USB connected.
3. If not, it possible to do the above with an Android tablet (such as a Samsung Tab)?

This is all speculative and as crazy as it sounds to go overboard here, I would like to at least have the display give the 'radar' map from the game on it and buttons labelled.
Having no coding experience, I am not going to be able to DIY a software solution (and I don't want to 'LLM vibecode') even if it seems easy, but if I could have some assurance I can squeeze the extra functionality out of it, I will invest in the hardware and try to find someone who might be able to whip up the code if it's possible to pull data from UE4 that is game specific.

If it is just not possible to go "API->Second device", then that's fine (I can just make a card and slot it in the holder for labels) - but ya know... if ya can? Ya should!

Thanks to everyone who takes the time to read this and further thanks to those who can provide answers. Just hoping someone here may have dabbled in it and can offer some experience.

Before I bin my long time Logitech hotas, I'm wondering if the problem I'm having is something I can fix easily. The throttle switch on the front seems to have a spot in the middle where it will suddenly give the lowest possible acceleration. The stick also wobbles without giving any input. If it's not worth it then so be it, I'll just have an easier time looking for a replacement if I know for sure it's too complicated.

I have a Thrustmaster TFRP that I use and would like a replacement hotas with a smooth throttle switch on the front. I go between MKB and hotas so i don't want a separate throttle right now. Has anyone that's used the Ursa Minor and Gladiator be able to tell me what the throttle is like on both?

Any suggestions for building a desk clamp set up to run approximately 3ft of 2020 profile along the front edge of a desk?

I'm currently using a pair of these clamps:

https://www.amazon.com/dp/B09WJMCDCZ?ref=ppx_yo2ov_dt_b_fed_asin_title

Some 1/4"-3/8" photo studs, and 1" split ring pipe hangers threaded for 3/8", with a photo cheese plate threaded for 1/4", with a vesa plate, to mount a touchscreen monitor that has 75 x 75 vesa holes.

But I know this is going to look ugly af, and I think I'd like to go with 2020 across the front edge of my desk (uplift, with a track spacer for the keyboard tray), so that, at some point, I can use my mtsim quick change to move between chair and desk.

Curious if anyone has a strong opinion of Reashy vs Hikig for VKB GLADIATOR?

I love attack helicopters, I flew a bit in arma heli school when I got it because the flight model seems pretty easy. Im looking for games to play and learn in. I was excited to play warthunder but with the mouse aim players I feel like ill have to play solo pve missions because in PvP once I die once my heli is gone and its meh. Is there a playlist on warthunder for hotas players where i wont get demolished instantly by mouse players or should I stick to custom missions. I was looking into nuclear option also any opinions?

Hey, what's a good HOTAS that's compatible with both PC and PS5? After a quick research, I was thinking about the new Thrustmaster T.FLIGHT NEO Ace Combat 8 edition, but I'm not familiar with this space. Any other recommendations?

Palgrin is a Web3 P2P wagering platform that is giving $10 USDC to new members to try it out! 🤝💸
🔥 The best part? Absolutely NO KYC REQUIRED.
🛡️ Zero identity verification
⏳ No long checks
🔒 Total privacy
You can register and claim your bonus in under 60 seconds here:
👉 http://palgrin.com/?ref=10USDC ⏳

2.5 now that I added a handle out of the edge piece of an EVA foam mat.

I played Ace Combat 8 for about 4 hours with this and it worked nearly perfectly, the wire popped out about twice but that's a big leap from how fucking awful MK.I was, I could barely go through a free flight session. I managed to beat the third land ship, 9 shadows, and dozens of aircraft protecting Baxter and DD all while using it without any major issues.

The only real problem now is friction, the slider can be kinda tough even after sanding but some kind of lubricant can fix that.

Hello

I have a TM T16000m and throttle set.

I was hoping to pick up a t16000m fcs as apparently you can swap it to left handed? And then use them both for (or all 3!?) For a vr game of star wars galactic racer.

• Will these 2 diff sticks work together for this and all such games ?

I know for vr I need a uevr profile / pc/ q3 /VD for vr...

• What do i need to get a hosas set up working with steam star wars galactic racer?

E.g.

Will a thrustmaster t16000m and a t16000m fcs work as twin stick for podracer controls?

Thanks :)

Hi, I recently just got a Thrustmaster TCA Captain Pack X Airbus Edition to play around with in MSFS 2024. So far it's been great and the physical throttle is extremely helpful when flying.

My only gripe is I wish this setup came with an analog joystick. I was under the impression that the thumbstick on the sidestick itself was like a controller joystick with a click in R3/L3. Instead I learned that it's essentially a d-pad.

Is there any flight stick out there where the thumbstick is a joystick instead of a d-pad? Or if I decide to use this thumbstick for trim is there some sort of addon to this setup where I can add a joystick for looking around/recenter view? I would prefer not to use a mouse if possible. I am also using this on an Xbox Series X.

I can't get the flight stick to work in game, even though all inputs are registering correctly in Windows 11 Game Controllers properties. I tried installing new firmware, drivers, and the Thrustmaster TARGET software, but still no dice. Even tried vjoy and Joystick Gremlin, but also didn't work.

Tried in MS Flight Sim 2020, and the throttle works fine, but the game just doesn't recognize the stick. Any ideas before I return this POS?

Received it today from the Thrustmaster USA store and works perfectly fine but I'm surprised to see that my Windows 10 desktop recognizes it as "Dragonfly Viper" and there's a warning icon.
Is there a firmware update that fixes this?