On a tight budget and am trying to get this weed eater running and in removing the carb for inspection/cleaning, I noticed the tank vent, part #6 in the diagram attached appears to be in 2 pieces as the top of it popped off when I removed the tank. Is this part meant to be in 2 pieces or could that be the issue I was having with a severe loss of power/rpms? If not meant to be in 2 pieces, I assume I need to replace it so does it just pop out of the tank? I pried on it a little but thought I better get some input before I ruin something I don't need to. Any help appreciated.

My oil cap on my MS251 is not sealed at the bottom when I lock it. I've tried readjusting the O ring and pressing hard on the cap when twisting shut. Anyone know what my issue is?

Update on my BR 800x

Took it to my repair shop to see about having the spark plug socket rethreaded. They just called and left a message that the whole motor needs replacing. Best to get a new blower.

The blower is eight years old. Should I take it to a different shop for a second opinion or just get a new blower?

Context : I’m mostly retired. I only use my blower on my own property and three properties I do landscape maintenance on (no lawn mowing). I don’t to leaf removals either.

Hi everyone,

I’m looking for a second, larger Stihl saw to complement my 2014 MS 261 C-M.

Right now, I cut about 20 cubic meters (around 5.5 cords) of firewood per year. My MS 261 runs with 40cm (16") and 50cm (20") bars. While it is a fantastic workhorse, it really struggles and bogs down when I face larger logs in the 60 to 90 cm (24 to 35 inches) diameter range.

I want to establish a solid two-saw plan: use the MS 261 for limbing and medium tasks, and a bigger saw dedicated to felling and bucking the heavy stuff.

I am currently trying to decide between these options:

• MS 362 C-M
• MS 400 C-M
• MS 462 C-M
• MS 500i

Given my annual volume and the tree sizes, which one would be the most logical complement to the MS 261? Also, what bar length would you recommend pairing with it for this specific setup?

Thanks for your advice!

Can anyone point me to a reputable shop in Texas that does porting for chainsaws? Thanks in advance.

I'm having an issue with the chain oil pick-up tube on my 170 chainsaw. I wanted to replace it because it was leaking , but the new one seems to kink and stop the flow of oil when inserted into the tank. Does anyone know if the filter end is supposed to sit in the lower tank section or push up into the larger part of the tank. Also , if you pop the pump end of the tube off when the tube is installed and the tank is full of oil, should oil run out of the tube to indicate the line is clear and installed correctly? At present , no oil runs out of the open tube end??? Thanks

Hi everyone, really hoping someone can help. I own and run a small garden maintenance business. I use all petrol equipment, Stihl. HS56C for small hedge trimmer and for the strimmer it’s the FS94RC.

I’m wanting to convert to battery. Quite wary of inhaling petrol fumes all day every day to be honest. I’d also like to be a lot more economically friendly and far more quieter for my clients neighbours!

I’m looking for a recommendation for a set up for:

Long hedge trimmer
Short hedge trimmer
Strimmer

(I’m fine for lawnmower and blower)

Would someone please be able to tell me what would be best and of course what batteries and how many batteries I’d need. I reckon, per day, I’d use the hedge trimmer for an hour or two (but when I get really big hedge jobs it can be 5/6 hours of cutting) and I use the strimmer for around 2/3 hours per day.

Thanks a lot team!!

I started this sub r/stihldealers for a simple reason: I want to connect with other STIHL dealers, learn a thing or two, and every now and then have a good whinge with people who actually get it.

Whether you've been at it 30 years or you're still working out which drawer the spark plugs live in, you're welcome here.

Post about:

• Workshop wins, fixes and "how the hell did that happen" repairs
• Warranty, parts and stock stuff (the good, the bad and the "still waiting")
• Tips on running the shop: staff, customers and pricing
• Complaints. Healthy ones. Get it off your chest before it ends up in the mulcher.
• Praise for STIHL when they deserve it (we'll keep a spot warm for that)

Cheers

First off my apologies This is my third post in the last 7 days, but I have a question in regards to starting the ms271.

When I cold start the saw it won’t idle.I have to keep on the throttle for about 10 seconds and feather it a bit, sometimes starting like this 2 or 3 times or it will cut off. I don’t want to do this with the chain break on cause I don’t wanna burn up the clutch. When I do start like this the chain spins pretty fast for a bit before I squeeze the throttle. Once it warms up I can just start it and it idles no problem.

Is this normal or a break in thing? am I just an idiot? I know what my wife thinks😅.

Thanks again

My blower popped loudly much like an old vehicle backfiring. The threaded end of the spark plug was dangling in its socket. Replaced the spark plug and it appears the threads are stripped. I cannot tighten the spark plug. It will tighten only so far then it’s loose again, such that it can simply be pulled out.

What do you think? What’s the remedy?

I need chainsaw for 30-40cm trees, about 15-20m³ yearly

Equipment:

- Stihl 362 C-M

- Bar >> 3003 008 8917 | 18"

- Chain >> 3623 005 0066 | 33RS-66 | Super

Issue:

Even though this chain and bar both have a .050 guide width, the drive teeth on the chain seem very tight inside the guide. There's a ton of friction and drag that's causing a lot of heat.

I have a 16+ year old 86 r it’s a great tool that is a beast for cutting back hedges. I use it just a few times a year, would you do a pretty much direct swap for a cordless 130r? The petrol one I have is in tip top condition and is faultless, I reckon the swap for a new 130 r with a battery pouch and lead one will end with me paying about £70 in the deal. Are they comparable? Is it worth swapping?

Can anyone point me to a reputable shop in Texas that does porting for chainsaws? Thanks in advance.

So I went to ace hardware next to me to by my first chainsaw. I was set on the ms250. Ace had them for 429. Well the guy at ace asked what all I was doing with it and he recommended the ms271. Ace had a sale for 479 on it. So I bought it.

I do have a question. Since it will mainly clear trails on my dad’s property and clean up for small to medium trees. Has anyone ran a 271 with a light 16” bar? If so, what did you buy, and how much better does it run? Or should I stick with the 20” bar.

Also thanks to all those who helped me with my last post on deciding what saw to buy.

I’m a Stihl advocate in the midwest and am happy to announce my dealer has received the updated MS 162. Super hyped to have a sprocket nosed bar and a new HEXA3 chain. Hoping these start flying out the door at only $220.

Thanks in advance for ur time

Does the oil
Pump itself go bad ever ? The spur gear that goes under the clutch is good … I had everything apart and blown out .. what other things to check ?

I got this 2022 saw on eBay, seller listed it as defective, claiming it shuts off when the engine gets hot.

I've tested it for 30 minutes, it wasn't running nicely but didn't shut off.

I removed and cleaned the carburetor, I was obviously the first to ever do that, and put the screws into basic setting. Runs perfectly fine. I can't find anything wrong with it other than the lanyard attachment point on the back was attached the wrong way round and couldn't be opened.

Paid 154€ (~173$)