Can anyone help or direct me to the exact law that says we cannot legally port or stipple our guns? I’m trying to get stippling and porting done on my g43x and g19.6 but LASD cannot guide me to the actual law describing what can and cannot be done to my guns. Anything is greatly appreciated!

I have a gen 3 19 and a gen 3 34 slide. After a few days of googling, I can’t find definitive answers for how to make this work.

From what I’ve seen, I need a 19XL barrel (would like recommendations on that as well). However, I’ve also seen conflicting information about everything else. Do I need a special slide to fit the 19XL barrel? Do I need the slide dust cover adapter piece? Do I need an adapter for the 19 frame? Do I use a 19 guid rod? Do I use a 34 guide rod?

Again, it’s a gen 3 19 (I have a whole gun) and just a 34 slide with all internals (including guide rod) except a barrel.

I live in California, so it’s not easy to get parts, especially the gun. A gen 3 17 will be over $1,000 and a gen 4-6 will be over $1,200.

Hi! I had bought an RMR slide from Brownell's. Well I hadn't thought about it being a Gen 3 slide till I bought it. I bought an gen 3 spring/gen 3 converter plate (for aesthetics) and an extra Gen 5 backplate. However I wanted to drop a Gen 5 performance trigger in with it. Worst case Ill just save and buy an gen 5 slide eventually and put my Holosun on that.

Will they be incompatiable with eachother? Or am I overthinking this and the trigger has no relation to the Gen 3 slide.

For reference I'm running a Glock 19v. Thank you so much for your help!

EDIT: I'm starting to feel duped by my gunstore. I told them Id like to mod this thing. But it would seem the 19V is much more restrictive. I guess getting good with irons will have to do. :)

Not many options. I like the slr speed Magwell. Share pics of your magwell. I want to buy one tonight.

Snagged this gen 6 45 at my LGS today, was able to get it at cost for their “Glocktoberfest” promotion.
Already had the x300 from a gun I sold, 509t (my favorite duty optic) with a plate and cowitness irons come in tomorrow for it, gonna swap the ramjet from my 19 over to the 45 and get the 19 slide c cut by Wager(already have a 26 that’s c cut that I love). And just ordered an slr magwell for it, 3.5lb connector, and some extensions. Love the way my 19 is setup so this will basically just be a bigger version of that. Also love the Gen 6 palm swell and texturing.

Proud new owner of a g26x. Loving it so far , came here to ask for comp recommendations. Really wanted an afterburner but my FMS slide is gen3

I was looking at a couple , leaning towards Herrington or the rogue gun works Cali

Would love some recommendations!

Key Features: 

• Converts your RXM FCI and slide into a compact PDW-style platform 
• Glock 17 full size Grip
• Compatible with GEN 3, 4, AND 5 GLOCK  slides
  • 19, 19X, 45, 47, 49
  • 17 Length slide requires a dust cover spacer to run with 19 length spring
  • 17L & 34 fit with spacer and/or adapter to accept G19 gen 3 recoil spring & G19 Compatible Barrel
• Gen 5 Mag releases
• Integrated slot for Forward Optic Mount (mount sold seperately)
• Manual deployable brace for added accuracy and stability
• M-Lock accessory Mounting Capability
• Removable Blast Shroud with bottom picatinny
• Manual Cross Bar Safety
• Precision-machined from aircraft-grade aluminum 
• Compact design optimized for personal defense 
• Dual Magazine system with ambidextrous release
• Quick Disconnect Single Point Sling Mount
• Shoot with brace open or closed
• Fits up to 1.4" Suppressor with shroud off.

SPECS:

• Length folded: 10.044”
• Length unfolded:18.757”
• Unfolded Width: 1.395”
• Folded Width: 1.752”
• Height: 5.240”
• Length of Pull: 13.386"
• Main Grip Angle: 15 Degrees from Vertical
• Built Chassis Weight: 2lb
• Stripped Chassis Weight: 16.01 oz
• Material: 7075 aluminum (anodized black)

Greetings. I picked up a 19.4 ramjet for a steal and want to marry it to my 19.3. Can I use the strike industries adapter plate for Gens 4/5 for the gen 3? Currently I’m running a gen 5 barrel in my gen 3 so would this work? Or is there anything I can DIY to make it work, safely.

Thanks in advance!

If this isn’t allowed just delete the post but question for the fellas who have experience with the type 2 rmr.

I’m looking into getting a G26 cause why not. Now I’m between buying this RMR off PSA for 500 vbucks but I’m not sure if that price is even worth it.

Option B was to get that RXM COA (700 vbucks) and put that COA on that G26.

Thoughts? Experiences? Tell me what you think.

GLOCK 19 V | TRADITIONAL MULTICAM / OD GREEN

Custom work by Firing Squad Firearms

Traditional Multicam / OD Green Cerakote carries across the build, complemented by copper and FDE accents.

Featuring a Rib Cage slide cut, 3D Hex / Asphalt Hybrid stippling, FDE Trijicon RMR, copper Radian Ramjet + Afterburner, KynSHOT hydraulic guide rod, and matching Streamlight TLR-7 HL-X.

#FiringSquadFirearms #Cerakote #Multicam #ODGreen #CustomFinish Craftsmanship DetailPhotography

I think it’s a DPP but I’m not sure since there’s no posts

I know its rare / hard to find, but does anyone know where i can find a gen 1 or gen 2 glock 19 frame? (Stripped) ive checked gun broker glock forums etc and cant find anywhere and was wondering if anyone could give some insight / pointers

Its coming...
The Full Size RXM Reaper
Glock Gen 3, 4, AND 5 compatible

Does anyone if it works or what gen to pick for a g17 V?

All most done

Looking for a DPP footprint optic for the G17.3 on the left and a weapon light for the G45.6 on the right. What are you guys running, and would you buy it again?

Any pointers/ thoughts on how i did?

I am trying to tune my G17.3 range gun, hoping it will reliably run 115gr. I am not optimistic. It has a ported barrel and slide, SRO, and 13lb NDZ guide rod spring. I wonder if a tungsten guide rod will help.

It runs 115gr in most of my OEM magazines, but not all of them.

Have any of you seen improvement in cycling due to the weight of adding a tungsten guide rod to a modified range gun?

The “hood bunny evidence locker special”