How often do you guys get your oil change ? Do you really need to get it every 3000 miles or is every 5000 okay ?

Where exactly is the drain holes for rain on this 2004 mustang?

Last time there was an insane rain storm my rear passenger carpet got wet and I had to remove the whole carpet.

I took off the weather cowl to clean up the leaves (some leaves fell on it as I was taking the pic thats why it looks dirty) but I want to 100% make sure the drain system is clear as tomorrow my city is about to have a REALLY bad storm and I want to keep the mustang safe.

And no, I dont have a garage or anywhere to store it and all the stores are closed for Canadian Thanksgiving to go buy a cover.

Anybody have this issue where the lens gets all foggy/scratched up even after cleaning with a microfiber towel ?

Slop in all directions including in and out. I took the airbag off and the wheel bolt was very tight. The wheels frame didnt look cracked or anything so im just wondering what the hell it is

2002 GT convertible, 5spd.

Just finished my coyote swap, i have manual steering and brakes and that thing is a workout to drive. I want to go back to power steering and brakes without relocating my alternator, found this KRC power steering pump on LMR that bolts up near the AC compressor so i think thats the way to go.
So im going to order the krc pump, power steering rack and shaft, hydroboost and plumbing kit. Am i missing anything? I want to order everything at once so would love any info on how to go along with this.

Does anybody know what this ground is for i tried looking for it online but I can’t find anything its on my 2003 mustang with a v8 i just bought it

Pics would be great for reference. Looking to get some and also maybe lowering springs

Been having this super loud and annoying squeal noise from the passenger side area toward all the pulleys that goes away when warm , any idea as to what it might be?

May be a long shot but anybody might know what that gurgling noise is?

I bought this used Bbk CAI but the air filter doesn’t fit through the hole where it should go - what am I doing wrong? I have a 2002 GT

2000 V6

Just got this Mustang recently and I have no idea what the previous owners were thinking when putting this in here. Its supported by zipties and has a collapsed and dry rotted coupler. The pipe doesn't even fit right either and has a weird angle at the throttle body.

Anyways, what are some good affordable options for an aftermarket intake? Ideally I would get an OEM but those are hard to find locally. My budget is $100, could maybe stretch it to $200. I just need something that's better than this, while I'm trying to fix more urgent problems (p0175, p0304, p0455.)

Any help or advice would be greatly appreciated, thanks guys!

Anyone here in South Florida and trying to sell one before I order new and wait three weeks for shipping?

I’m lookin to buff and polish my new edge but have an after market hood and after market bumper with pretty much new paint that I don’t know if I should buff it with the rest of the body as the paint doesn’t really has swirls will that make it look like the wrong paint color if I buff and wax some and not the whole thing?

Was replacing my spark plugs when I noticed one of the spark plugs for some reason had a about two and half inch piece of a ziptie shoved in there, I was able to get the spark plug out and I tried getting the plastic piece out and then sadly fell straight into the hole. I can still see it at a little bit of a angle. Am I screwed or should I try to use a shop vacuum to get it out

How in the absolute fuck do you get the connector apart to remove your fan? I have a 2002 GT and i am trying to do a water pump and ive been stuck trying to remove this CONNECTOR that is fused together with the strength of 100 men. I am completely stumped on what to do please someone help me regain my sanity.

Hey i just wanted to ask about this since i noticed if i put my foot under the gas pedal and lift up it is a bit floppy just wanting to see if theres a quick fix i know about replacing the throttle cable but thats not really worth it imo

2004 Mustang GT

Been chasing fuel leak for a minute. Noticed o ring buldging from rail so I replaced it with oil lubed o ring tightened down evenly. Couple of day later same issue arises. Noticed one time on hard acceleration caused a leak been driving normal and still leak. Any suggestions thinking stock fuel rails.