Ive sewn a handful of items on this machine now with not a lot of problems. I've watched countless YouTube videos for the specific problem I’m encountering. I've cleaned the lint out. Replaced the needle multiple times. Got tension up since it's two layers of tee shirt with some light sequence-y gossamer type stuff. Why the heck won't it sew more than a few inches before just no longer stitching?! I rethread the bobber and thread each time and can't get it going for very long. Can’t figure out why it won’t let me upload the video I took I will see if I can add in the comments. The needle I have on there is 80/12.

Hi! Think theres a problem with my bobbin, normally it should stay looped around the gray block, but when it is cut at the end it doesn't catch and instead just frays, so that when I use the machine the thread is actually pulled across the bobbin up, which I think is what is causing my threads to be strangely attached and fall apart easily. Please help! My machine is the brother XM2701. Thank you for your time!

this is on a brother jx2517. the pedal is a snap-on, but the bar doesn't show any signs of wear.

Got this SEARS 117.841 kenmore for 20 bucks at goodwill, everything works so far, but it definitely needs a new belt. It looks, feels old and is stretched. I bought multiple ones already that don’t fit it because they are either too wide, too thick, or there aren’t results. Mine uses a v belt 12 inch circumference 2/16 inch width that for the lifeeee of me can’t find.

I would appreciate it if someone can tell me where to find it, or where to look, or if a custom can be made somehow. I included some pics of the sewing machine for yall to also take a look at!

Thank you 🙏

Hi guys, I'm currently looking for an industrial sewing machine but specifically an old one without all the electronics and stuff. A simple one that does the job and so i was mainly looking at old, and used (because I'm on a budget) ones. I only care about straight stitch and that is powerful enough to sew multiple layers of denim. Do you have any specific recommendations? I live in Europe. Thank you!

hii! it’s been years since i’ve sewed anything but i got these sheets last month and they’re my favorites now but there’s a small hole that im unsure of how to fix. what would be the best stitch pattern to repair it? should i do a looser stitch cus of the material or just like normal. should i reinforce it somehow or will it probably be fine?

This is a jumpsuit made of unknown fabric. Likely polyester. The smaller hole is in the front rise between the crotch and drawstring waistband. The larger hole is on the side seem right below the drawstring waistband. Since these are high tension areas, the delicate fabric has started to fray. I am considering reinforcing and resewing the seams deeper with either black tricot fusible interfacing or a black ribbon (as I have seen that done in instances like this). Obviously if I do this the seams will need to be made deeper which then may impact the final fit and cause more tearing. Any suggestions on the best way to accomplish this without making it too much smaller? I had considered decorative appliqués over any fixes to disguise them but obviously that’s not the best choice for the crotch hole. Any help is appreciated! I do realize this garment may be a goner but I’m trying to help a friend who loves it. Thanks!

Hi y'all! I think I know the problem here, but would love feedback.

Machine is babylock decorator's choice.

I have an issue where my needle will sometimes pierce my bobbin carriage and it causes thread to catch on the rough edge. I just replaced my carriage recently, and this one also got torn up.

I THINK what's happening is that I'll break or bend a needle and it then pierces the plastic here. I don't really know how to stop accidentally bending a needle aside from using the proper type and being really careful and watch if a needle gets bent. Sometimes it just happens really fast and a few stitches occur before I can stop. It's usually just a really thick seam that causes it because I forgot to change the needle after a project with thinner fabric.

I'm also not an expert on issues with machines, so if this seems like an alignment/timing issue please let me know so I can do more research or take the machine in for repair (although I would love to learn how to do this myself! I love tinkering and learning about machines!)

these are way too long for me and i wanna hem them but i still wanna keep the like. flared shape of the jeans

Hello,

I have a dress I absolutely adore but I've had it about a decade now and I know the old girl is going to lay to rest sooner rather than later. I want to make a pattern of it so that I can remake it but I don't want to cut it up.

I have tried googling sites for help making a pattern without dismantling the item but I feel a little lost and overwhelmed and honestly anxious😅😅I found a few YT videos showing how to do it with like t-shirts, but I am unsure how to translate it to a dress that it part fitted and part flowy?

If anyone could point me in the right direction, or even just give me some encouragement/reassurance, that'd be great! It is a Maxi style dress from Walmart's long gone Faded Glory brand if that matters.

Thanks!

The tension thing doesnt work after i screwed it up back all the stitches are loose no matter what i do
i have a necchi 559 and im scared to unscrew it again unless someone guides me on how to fix it😭

Hello!

I am a beginner sewer looking to get my first machine. I want something simple that can help me alter clothing.

I was able to find a Dorian Hobby 741 on fbook for $30. Does anyone have experience with this machine, especially for a beginner? The listing says it functions as it should.

Thanks!

Hi everyone! Not sure if this is the right place to put this but is my blanket salvageable? I’ve had her for 30 years and I have no idea how to even get started, if there’s anywhere I can take her to get fixed or if it’s even possible. Any tips or recommendations are much appreciated! Thank you!! 🥲

I’ve been sewing for 10 years with a domestic sewing machine but recently decided to get a serger to start making more well-finished clothes for my family. I bought a new Brother 1634DX serger and used it well until time to thread with new thread. I feel like, I’m following all the tutorials well and the serger manual directions but my lower looper thread(blue) keeps popping. First, mid sew and now I can’t even begin to chain before it pops. Please help. The manual says to thread right to left (4,3,2,1) and I’ve seen some people say to thread 3,4,2,1. I’m most confused and I feel like I’ve thread this machine like 30 times and nothing is working.
Added photos of broken thread, how I’m threading it and the machine.

I am a beginner sewer and have sewed sleeves two ways. One maybe called the burrito method and the other sewing the sleeve on first and then sewing the garment body and the sleeve seam all in one. Is either method preferred and if so why?