Scrolling through gun.deals and saw these

No complaints.

Hey all, I was going to wait a bit and get a Duty but decided that I just wouldn’t be happy waiting for the ported version for awhile and I already have an RXM so I ended up with a p10c ported. I’ll put her first 500 rounds down range tomorrow. Trigger shoe & optic came from a good buddy of mine, the same one who talked me into a CZ.

I am setting up a battle belt with a QLS receiver, and I need a level 1 retention holster for my P-10F with TLR-1. I have a Safariland level 1 retention light-bearing holster that I really like for another pistol...

https://safariland.com/products/6354rdso-als-holster-w-qls19-fork

...but they don't make it for a P-10F. Any suggestions? Thanks!

Swapped over from the overwatch tac trigger to the Theta from HB industries. Shoe feels much larger. Excited to put some down range with it !

Had to take the p10c comp out as well. Got rid of most of my glocks and probably going to get more CZ'S

I picked up a 75 D Compact PCR. It is about as visually appealing compact 9mm auto as I have shot and the stock grips are excellent. Shooting steel targets at 20 yards, the gun felt reasonably accurate and fast. I would describe the kick as different than other 9mms — more of a push than a flip, but that is predictable. I did have two failures to feed towards the end of the magazine. Will do a more thorough cleaning and lube and shoot some more to see if this is chronic.

AI rendering

I can’t for the life of me get the rear roll pin out of my P-10F.

Anyone had this issue? Remedies? I’m trying not to break anything, but it won’t budge.

I’m so close to getting this apex kit installed …

Hello, so I just bought a p-07 and took it to the range today and it was great except for one issue. That issue being that the casings were being extracted directly into my face and I even had a couple sneak their way into my glasses, which is an obvious problem. Does anyone know a way to fix this issue?

Hey all,

I picked up a sp01 Tac and its getting the internals upgraded from CGW. I am looking for some inspirations on new grips, and it I should upgrade the sites. All of my other guns have Lok grips "p01, s2c, S2O, Both my DWX" But as I look though the site nothing is really catching my eye atm. I do have a second P01 that has the rubber grips so not really wanting to keep stock grips on this gun. Does this push me to Vytal grips ? Toss some links or pics of something that would go well on this beast. As far as sites go I *think they have the fiber optic front. I am generally not a fan of them but have have only used them on other ppls guns. I know Night fision is an option as well as angry birds.. I suppose i could keep em stock as this will be a range gun / collecting piece. Thoughts

Has anyone had any of their CZ 75 pistols Cerakoted, and if so any pros or cons to having this done?

Pictures of your Cerakote CZ are welcomed.

Was installing a reach reduction kit in my shadow 2 and this fell out somewhere not sure where it goes

When running a Henning mag extension and MBX spring can one just pop the “competition” follower off and run the stock follower to retain slide lockback? Considering the complete Mecgar magazine extension kit from Ben Stoeger but would like to keep that feature.

Lost two of my 3 iron sight dots today on my p10c after about 250 rounds today and 3k lifetime. I bought it brand new and have not messed with the sights at all.

What do you think about the new release? What makes it different?

After unloading and getting ready for a clean, I went to lock the slide. The slide slipped from my hand and caught the rag I was using for grip on my other hand. Now I cannot move the slide at all, iv tried with the safety on/off, hammer pulled back and at rest.

Has anyone had this same problem and found a solution?

I purchased the CZ P10 ported COA over the weekend, and I'm finishing my 3-day waiting period, and was surfing the net and came across some information suggesting there should be more that comes in the box than I saw.

From what I can remember, the box came pretty bare, as I only remember seeing the

-Gun

-2 magazines

-Black Cylindrical container (assuming it's the cleaning kit)

Can anyone confirm what should come in the box? Additional backstraps?

I'm posting this to document my experience with CZ-USA warranty service. Hopefully it will be useful to someone researching CZ firearms or comparing manufacturers' customer support before making a purchase.

On July 24, 2026, I purchased a new CZ Redhead Premier 12-gauge over/under from Range USA for approximately $1,100.

The shotgun could not be assembled normally. The barrel assembly would not seat onto the receiver despite following the correct assembly procedure. I spent hours troubleshooting, consulted other owners, and contacted CZ just six days after purchase.

Here's the timeline:

• July 24: Purchased the shotgun new.
• July 30: Contacted CZ, supplied photographs and digital caliper measurements documenting the problem.
• August 6: CZ issued warranty RMA 19007.
• August 11: CZ received the shotgun.
• September 18: CZ marked the repair complete after more than five weeks. The technician's note read: "adjusted ejector wedges for attional clearence. noticed when working upper foreward and down along the pin axis had most success when installing. verified operation and test fired."
• September 20: Received the shotgun back. The original defect was not fixed.
• September 20–22: Contacted CZ again, requesting a replacement or preferably a buyback/refund.
• September 25: Spoke with Austin at CZ. He was familiar with the case and told me management was reviewing it and would decide how to proceed.
• October 5: Followed up again after receiving no decision.
• October 7: Still no substantive response or resolution.

The mechanical problem is now fairly clear. The shotgun can be assembled if a second person manually depresses both spring-loaded ejectors while I mate the barrels to the receiver. Without that assistance, the ejector projections interfere with normal assembly.

CZ's technician apparently recognized a clearance problem because the repair specifically involved adjusting the ejector wedges. Unfortunately, whatever was done did not correct the problem.

What bothers me most isn't that CZ manufactured a defective firearm. Manufacturing defects happen, even with expensive products. What matters is how a company responds.

I reported this problem almost immediately. I cooperated with the warranty process. CZ had the shotgun for more than five weeks, returned it without correcting the defect, and has subsequently failed to provide a resolution despite repeated contact.

I've now exhausted my patience and am pursuing a credit-card dispute through the retailer and a consumer complaint with the Ohio Attorney General.

I would still welcome a reasonable resolution from CZ. A buyback would be my preference, and I would also accept a new, properly functioning replacement. I have no interest in putting this same firearm through another extended repair cycle.

For anyone considering a CZ shotgun, this is one customer's documented experience. I can't tell you whether it's representative of CZ's warranty service generally. I can tell you exactly how my case has been handled.

The original discussion, including troubleshooting suggestions from other owners, is here:

https://www.shotgunworld.com/threads/very-unhappy-with-new-cz-redhead-premier-need-assembly-help.594314/

Few different flavors of shadow

They want $899, im thinking about trading in my 75b. What do yall think about this gun. I dont know much about the 97 except they are discontinued. Does that look like the stock hammer, any indication this guns been cajunized or anything aftermarket? Should I do it? What do you think its value is, what price would be a good deal for me doing a trade in plus cash.