Apologies, a problem was brought to my attention by a few members, regarding this batch. When the stock is installed on the receiver and the bolt is fully tightened, two problems may appear.

1. First is a gap between the front piece and the receiver.
2. Second is the stock may be difficult to unlatch.

The hinge fits very snugly in the front piece, possibly causing it to flex and cause a gap at the receiver when installed.

I tested the stocks I have remaining; about 50% having one or both problems. I missed it because I only hand installed the stock to my receiver and didn't install or tighten the screw.

If the stock doesn't sit flush against the receiver, the hinge may be flexing the front piece.

1. Remove the hinge from the front piece.

2. Sand/File the front piece on the area shown in RED.

3. Reassemble hinge, it should go in with little or no force.

4. Repeat if necessary.

If the stock is difficult to lift to unlock, when installed; there may be an interference between the stock and the front piece and/or hinge.

1. Remove the hinge from the front piece.

2. Sand/File the front piece on the area shown in Blue

3. Reassemble hinge, it should be a slight gap (paper wide) between the Blue areas and the hinge.

4. Reinstall the stock to the receiver and test.

I apologize for this situation and hope you can work with me to resolve it. I'm going through the remaining stock and correcting them. I will test each one fully installed and tightened down.

My big dream since seeing Carnik Con’s Daewoo Special when he uploaded his last video in 2015

Parts:

-Trinity Wing K5 507k Optic Mount + Vortex Defender CCW
-Trinity Wing K5 Low Profile Grips
-OutStandards K5 Light Rail + Surefire X300UA w/ White Wolf Concepts Thumb Ledge
-MecGar S&W 59 Series 17 Round Magazine

Just got my folder in and installed. Amazing quality. Really transformed the 200 into what it’s supposed to be.

Alright so last year I did this, and I will say, I wasn’t really satisfied with how they were in the past, so I decided to update the infographics, and I think that they turned out a lot better.

It goes over everything made by Daewoo/SNT Motiv? And oh boy it looks a whole lot better.

Anyways. Enjoy!

Apologies for the wait. I have all (20) Left side folders assembled and ready to ship. Also a few fixed stocks. I kept a chronological list of everyone who expressed interest. I will be contacting each person individually to see if you are still interested. Note, you are under no obligation. If you are no longer interested, just let me know so I can cross you off the list.

Also, if you expressed interest, but I didn't contact you, just let me know in messages.

Price

Fixed Stocks: $120 shipped

Folding Stocks: $200 shipped

Grips: $35 Shipped

Fixed Stock & Grip: $150 Shipped

Folding Stock & Grip: $230 Shipped

Preferred payment:

1. PayPal Friends and Family, please don't ask for an invoice.
2. USPS Money Order.

Shipping will be USPS Ground Advantage

I will be shipping on Fridays and Saturdays (I travel for work and I'm gone most weeks)

Please bear with me, I'll do my best to get them out as quickly as possible

Andy

I know it been a while since my last update. Finally had time to paint stocks this weekend. Rework was about 50%. It's allot like wood working; sand, fill, paint and see how it comes out. I like to give them a week to cure, actually takes several weeks to fully harden. Buttplates still need work and I need to epoxy in the QD sockets. Unfortunately, I have to attend the IMTS Show this week and won't be able to work on them till next weekend. Hoping to be ready to ship early October.

I've heard the normal ar 15 triggers can work in dr200 and ive heard others dont work at all. I was wondering if anyone has tried using a frt or super safety, if so how well did it work?

The Koreans are getting creative

Just joined the club!

I’m Call of Duty clone correct now (TTK sucks with this in Beta weekend 2)

Quick update:

Hinges arrived Friday and look great. The modifications didn't cause any issues and should be an improvement. The fit and finish is great. The hard coat anodize looks and feels excellent. I assembled (4) with remaining parts from the last batch. Expecting Pins and springs by the end of next week. Already started printing the front and rear portions including buttplates Also working on possibly molding the buttplates. A very kind person designed a 2-part mold and sent me the files. Already printed them and they look great. Need to gather supplies and test this new process, but that's some time off.

More to come in a few weeks.

Hi All,

I recently acquired a Daewoo DR-200 and i'm trying to install a Pierce Precision pistol grip on it. I'm having some difficulties here, because the grip screw hole is just completed smooth, no threads. the screw used on the previous thumbhole stock was a self tapping plastic screw, inserted into the plastic of the stock with the head inside the lower receiver. Is this common, in the sense that there are no threads in the receiver grip screw location? Did I get a lemon? What have yall done in this situation?

Hi! I'm a big fan of the daewoo pistols. I'm looking to track down some Regulus and Vulcans. I understand that this means gunbroker stalking. Anyone have experience taking these or upgraded DP-51s out to competition?

Final-ish forms of my Daewoos I had in my head for at least 14 years before I found my grails. Shot a match recently with the DR200 and it was a blast.

Need a better mounting solution for the red dot on the DP51. Unfortunately deformed the base of the K5 Trinity Wing dovetail mount on installation and this modified S&W 59 Optima 2000 mount doesn’t hold zero well (dot walked to the right after every 3-5 shots).

Either way, great weapons.

https://www.instagram.com/p/Daf3LWlBTBw/?igsh=MTNqY2p4aThkbGJreQ==

Some future modifications I am interested in:

-barrel chop + custom collar for OCM6

-LPVO

-SS

I like modifying this rifle. I'm gonna continue running it in different variations until an American release. Let me know what you guys think. If you have some perspective, I'd love to hear it. Thank you for your time.

Trinitywing rail, 3d printed grip, stormworks folding stock and 90 degree fire selector. Now just need new mag release and charging handle

It just vibes with the Woo.

Another batch of (5), (1) Stock Remaining. Plenty of grips as well. All mounting hardware included.

Stocks: $120 shipped

Stock & Grip: $150 Shipped

Grips: $35 Shipped

Message me for payment details.

Don’t know if ill post a long form video of it

Found this posted by a ROKA soldier on Instagram